BSOD 0x00000116 only while playing FIFA 14

Hello and welcome :) .
Please follow the Blue Screen of Death (BSOD) Posting Instructions

Unfortunately files are missing, most importantly the dump file itself.

Please run the SFDT again and let it run its course it can take 15min at times to collect all the data necessary.
There should be eight files generated not including the dumps.

Thanks :) .

What you're experiencing is called a TDR (Timeout Detection & Recovery) and its not a real crash
in the sense that something wrong occurred in the Kernel.

TVeblen said:

"Display driver xxxxx stopped responding and was recovered"

Timeout Detection & Recovery (TDR) = "Display Driver Stopped Responding and was Recovered" is a useful feature that started in Vista and is also in W7 that allows the OS to try and recover from a video timeout so that the system does not crash to a bluescreen. Symptoms included a screen flash with the TDR message appearing one or more times or the screen blinking out to black. If the system cannot recover it will crash (Stop Error 116 typical). The issue is that the video card is not responding as expected.
.
.
.
.
There are numerous reports of hardware solutions to TDR's. The most common are:

• Poor Cooling
• Problems with the power supply
• Overclocking Issues
• Bad System memory or incorrect memory timings
• Defective PC Components

• More details HERE, please read.

The driver being used is on the older side.

Code:

BugCheck 116, {fffffa800418a4e0, fffff88005736394, 0, 2}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys

Code:

DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_TDR_FAULT

lmvm nvlddmkm
start             end                 module name
fffff880`05605000 fffff880`06126000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Sat Dec 01 05:24:02 2012

Please follow this detailed quote and update the driver.

Arc said:

Install the 314.22 WHQL only.

• Uninstall All nvidia items in Control Panel > Programs and features
  
  • 3D Vision Control Driver
  • 3D Vision Driver
  • Graphics Driver
  • HD Audio Driver
  • PhysX
  • nvidia Update
  
  (Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
• Now follow Drivers - Clean Left over Files after Uninstalling
• Boot normally now. Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
  
  

Test for thermals and stability:

• Download Speccy and post a Screenshot of the summary window, one at idle and another while putting load on the PC using Prime95 for the CPU side and Furmark for the GPU.
  
  • Before running Prime95 make sure to enable Round-off checking (see 1st post under the tutorial).
  
  

Testing the RAM:

koolkat77 said:

Test and Diagnose RAM Issues with Memtest86+:

• RAM - Test with Memtest86+

   Tip

• Pay close attention to part 3 of the tutorial "If you have errors"
• Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

When done with the testing procedure take a picture and upload it here.

Keep us posted :) .

Hi :)
It's OK, what have you don'e so far and what are you having trouble with?

That much we know :) .
What did you accomplish from post #6?