BSOD Hard Disk is failing?


  1. Posts : 20
    Windows 7 Home 64bit
       #1

    BSOD Hard Disk is failing?


    hi folks

    Today my WD hard disk is behaving weirdly. Any files accessed or transferred on the hdd will result in a crash. Transferring important files to another drive would result in a crash too. Running a program from the hdd does not work ie after awhile crash.

    I have upload the zip file.

    Please have a look and let me know what I should do. Any assistance would be very much appreciated.

    P.s I have remove the cable from the hdd and bootup as per normal. System was fine and was tremendously fast. That is how I conclude that the hdd is failing.
      My Computer


  2. Posts : 93
    Windows 7 Enterprise x64
       #2

    Do you have access to another computer?

    It does seem like a hard drive failure. Do you know the STOP error code? (ex: 0x116 or 0xD1) That would be tremendously useful.

    Check all the SATA cables and also try to plug them into other slots. I know it seems useless, but 50% of hdd failure assumptions are due to that.

    It may also be your computer, so try to put the disk into another computer and tell us the result.
      My Computer


  3. Posts : 3,056
    Windows 10
       #3

    enrell said:
    hi folks

    Today my WD hard disk is behaving weirdly. Any files accessed or transferred on the hdd will result in a crash. Transferring important files to another drive would result in a crash too. Running a program from the hdd does not work ie after awhile crash.

    I have upload the zip file.

    Please have a look and let me know what I should do. Any assistance would be very much appreciated.

    P.s I have remove the cable from the hdd and bootup as per normal. System was fine and was tremendously fast. That is how I conclude that the hdd is failing.
    Hi enrell :) .

    By crash you do mean a BSOD, correct?
    If so please attach the file a second time as it wasn't attached properly the first time around :) .
      My Computer


  4. Posts : 20
    Windows 7 Home 64bit
    Thread Starter
       #4

    Hi folks

    Sorry. Did not notice the missing attachment.
      My Computer


  5. Posts : 20
    Windows 7 Home 64bit
    Thread Starter
       #5

    surge411 said:
    Do you have access to another computer?

    It does seem like a hard drive failure. Do you know the STOP error code? (ex: 0x116 or 0xD1) That would be tremendously useful.

    Check all the SATA cables and also try to plug them into other slots. I know it seems useless, but 50% of hdd failure assumptions are due to that.

    It may also be your computer, so try to put the disk into another computer and tell us the result.
    Yup. I have replaced the cables and placed at different slots. Still faulty.
    YoYo155 said:
    Hi enrell :) .

    By crash you do mean a BSOD, correct?
    If so please attach the file a second time as it wasn't attached properly the first time around :) .
    Yup. BSOD
      My Computer


  6. Posts : 3,056
    Windows 10
       #6

    Thanks for the files :) .
    Based on the bug checks I recommend the following steps to be taken, in the order they appear in:

    Testing the RAM:

    koolkat77 said:
    Test and Diagnose RAM Issues with Memtest86+:

       Tip

    • Pay close attention to part 3 of the tutorial "If you have errors"
    • Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

    When done with the testing procedure take a picture and upload it here.


       Warning
    The Following Method Should NOT Be Performed On An SSD!

    Test both HDDs:


    1. Perform a Disk Check | Disk Check- Scroll down to OPTION TWO of the tutorial and use the /R switch in the CHKDSK command | chkdsk C: /R.
    2. Then Post the Disk Check results following | This Tutorial.
    3. Once back in Windows, download Crystal Disk Info and post a screenshot (multiple shots if you have more than one drive).
    4. Download SeaTools for DOS if you don't want to use a CD to test the HDD you can use YUMI – Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of both pages).
    5. If SeaTools for DOS is unable to recognize your HDD:
    6. Visit HDDdiag and follow the instructions | Or follow the instructions below.

    If SeaTools For DOS does not recognize the drive;
    Boot into the BIOS using the *Fx key.
    Look for an entry called SATA Mode (or something similar), it should be set to IDE / AHCI.
    It's probably set to AHCI which is why SeaTools doesn't recognize them in the DOS environment.
    Set it to IDE then save and exit usually by pressing the F10 key.
    Now boot into SeaTools and it should detect the drives.
    Start the Long Test and let it run.
    Upon completion don't try to boot into Windows as it will only result in a BSOD, go back into the BIOS
    and change the SATA setting back to what it was in the first place.



    Arc said:
    Re-seat the sata and power.


    Please scan for possible infection and file corruption:

    1. Download TDSS-Killer and scan for rootkits.
    2. Download Kaspersky Rescue CD and scan for other types of infections. (a how-to tutorial)
    3. Download Malwarebytes and DON'T activate the trail (uncheck the box at the end of the installation)
    4. Follow this tutorial on how to use the SFC/ SCANNOW tool in Windows.

    (*Kaspersky Rescue CD from a USB thumbdrive)


    Remove AVG using the removal tool and installing MSE instead.




    SSD care:



    writhziden said:
    You have an SSD, make sure the following are up to date:

    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.


    What peripherals are you using?

    • Type of keyboard?
    • Type of mouse?
    • An added controller / joystick?

    You seem to have the latest available release of your Ethernet controller driver,
    which is causing some issues.
    Code:
    Version   11.45.4.3
    Code:
    lmvm yk62x64
    Browse full module list
    start             end                 module name
    fffff880`0f000000 fffff880`0f065000   yk62x64  T (no symbols)           
        Loaded symbol image file: yk62x64.sys
        Image path: yk62x64.sys
        Image name: yk62x64.sys
        Browse all global symbols  functions  data
        Timestamp:        Thu Sep 08 10:34:54 2011



    May I ask if NetLimiter is essential?
    Code:
    lmvm nltdi
    Browse full module list
    start             end                 module name
    fffff880`04875000 fffff880`04de5000   nltdi    T (no symbols)           
        Loaded symbol image file: nltdi.sys
        Image path: nltdi.sys
        Image name: nltdi.sys
        Browse all global symbols  functions  data
        Timestamp:        Mon Feb 14 00:07:35 2011


    Let us know the results.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:35.
Find Us