Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Array of different BSOD's - NEW Sager Laptop LOGS inside

16 Nov 2013   #11

W 7

Hmm weird. I've had a few bluescreens.

RE posting SF tool logs again. Could you please look over again. Thanks a lot.

This should solve the issue. Hope it's not ram related.

My System SpecsSystem Spec
16 Nov 2013   #12

W 7

Whoops double post.

In the mean time I actually got a Tcpip.sys BSOD.
My System SpecsSystem Spec
18 Nov 2013   #13

Windows 10

Thanks for the update :) .

The last three bug checks are quite similar to the first, and all seem to have a driver misbehaving
so we need to turn to Driver verifier to hopefully help in uncovering the culprit(s).

Follow this post to enable Driver Verifier:
Also the MSinfo32 file is empty again,
Please confirm you have these services running and active:
Security Center, IP Helper, Windows Management Instrumentation.
> Services.msc > hit enter.

Then follow,
Please upload the MSINFO32 file:

Start → Run → type MSINFO32 then hit Enter.
In MSINFO32 go to, File → Save → name it your user-name.
Once the file is saved right click it and choose Send toCompressed (zipped) folder.

Attach the file in your next post.
My System SpecsSystem Spec

19 Nov 2013   #14

W 7

Ok. did driver Verifier. Was getting BSOD C4 message which was NVLDDKM.sys, constantly and wouldn't log on to windows.
My System SpecsSystem Spec
19 Nov 2013   #15

Windows 10

Hi thanks for the update :) ,
the new dumps aren't in the file uploaded please manually check the minidump folder.
If dump files are present in that folder copy them to the Desktop, zip and upload in your next post.

Note   Note
Before proceeding with the installation of the new driver DISBALE DRIVER VERIFIER.
Follow this post to disable Driver Verifier:
After a couple of complete restarts to the PC enable it again.
Follow this post to enable Driver Verifier:

Good job on catching what the the code and accused driver were :) .
nvlddmkm.sys is an nVidia driver for that reason please try the latest WHQL
driver, installation in the manner detailed in the quote below.

Quote   Quote: Originally Posted by Arc View Post
Install the 314.22 WHQL only.
  • Uninstall All nvidia items in Control Panel > Programs and features
    • 3D Vision Control Driver
    • 3D Vision Driver
    • Graphics Driver
    • HD Audio Driver
    • PhysX
    • nvidia Update
    (Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
  • Now follow Drivers - Clean Left over Files after Uninstalling
  • Boot normally now. Download. While installing, Select Custom (Advanced) install. In the next page, follow this settings:

Let us know how it went.
My System SpecsSystem Spec
20 Nov 2013   #16

W 7

Ok did the Nvidia thingy. Hope all goes well. Here are my Dmp's.
My System SpecsSystem Spec
20 Nov 2013   #17

W 7

Ok. Ran into a bit of an error. I did everything you said with the Nvidia driver thingy.

turns out if I do anything with the Nvidia Geforce experience (opening the program). Will result in a BSOD. the once I described before.

So ignore my old DUMPS.. Please check these ones out.
My System SpecsSystem Spec
21 Nov 2013   #18

Windows 10

Yep Driver Verifier doesn't like nvlddmkm.sys trying to corrupt the system, especially using
nvspcaps64.exe which is GeForce Experience.

In your next post, follow the posting instructions instead of posting only the dumps.

Did you follow the settings detailed in the linked post completely?
Please verify the drivers selected for DV to stress.
Run an elevated command prompt and type in verifier /query.
Start Menu> CMD - right click and Run as administrator.
Type verifier /query hit Enter and post a screenshot of the window.
Disable DV and uninstall the nVidia drivers.
Use the integrated graphics then enable DV the same manner as before, keep it for a couple
of days and post back with any new dumps or reporting a stable system.
My System SpecsSystem Spec
23 Nov 2013   #19

W 7

Ok it appears that it's not the only error occurring. Audio some times cut out etc.

Check out these new logs please .

Hope it all makes sense.
My System SpecsSystem Spec
25 Nov 2013   #20

Windows 10

Hi :) .

Please disable DV now. - Driver Verifier - Enable and Disable

Driver Verifier consistently found nvlddmkm.sys performing illegal calls which comes down to a driver
issues which needs to get patched with the next update from nVidia, since you're using the latest
(at the time of typing this) WHQL release there's not much you can about that
at the moment unfortunately :\ .
A device driver attempting to corrupt the system has been caught.  This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arg1: 00000000000000f6, Referencing user handle as KernelMode.
Arg2: 00000000000001b8, Handle value being referenced.
Arg3: fffffa801789c8d0, Address of the current process.
Arg4: fffff8800f158a6d, Address inside the driver that is performing the incorrect reference.
4: kd> k
 # Child-SP          RetAddr           Call Site
00 fffff880`0e735908 fffff800`033514ec nt!KeBugCheckEx
01 fffff880`0e735910 fffff800`03366bf4 nt!VerifierBugCheckIfAppropriate+0x3c
02 fffff880`0e735950 fffff800`0311e890 nt!VfCheckUserHandle+0x1b4
03 fffff880`0e735a30 fffff800`031781a5 nt! ?? ::NNGAKEGL::`string'+0x2027e
04 fffff880`0e735b00 fffff800`02ec3e53 nt!NtSetValueKey+0xe1
05 fffff880`0e735c30 fffff800`02ec0410 nt!KiSystemServiceCopyEnd+0x13
06 fffff880`0e735e38 fffff800`033554db nt!KiServiceLinkage
07 fffff880`0e735e40 fffff880`0f158a6d nt!VfZwSetValueKey+0x6b
08 fffff880`0e735e90 00000000`00000008 nvlddmkm+0x9aa6d
The other driver that DV found to be offensive is one mentioned in my post in this thread,
BugCheck 50, {fffff6fc40c5db58, 0, fffff80002f8f565, 2}

*** WARNING: Unable to verify timestamp for Ak27x64.sys
*** ERROR: Module load completed but symbols could not be loaded for Ak27x64.sys

Could not read faulting driver name
Probably caused by : Ak27x64.sys ( Ak27x64+1a11a5 )
It's doing so even after the update.
lmvm Ak27x64
Browse full module list
start             end                 module name
fffff880`0482d000 fffff880`04c3b000   Ak27x64  T (no symbols)           
    Loaded symbol image file: Ak27x64.sys
    Image path: \SystemRoot\system32\DRIVERS\Ak27x64.sys
    Image name: Ak27x64.sys
    Browse all global symbols  functions  data
    Timestamp:        Wed Sep 04 22:37:23 2013
A new offender that DV found was your Razer Naga try not to use it for the coming days and see how things are going.
On top of that please update your USB host controller.

Please clean your start up, - Troubleshoot Application Conflicts by Performing a Clean Startup

Please test your RAM:
Testing the RAM:

Quote   Quote: Originally Posted by koolkat77 View Post
Test and Diagnose RAM Issues with Memtest86+:
Tip   Tip
  • Pay close attention to part 3 of the tutorial "If you have errors"
  • Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.
When done with the testing procedure take a picture and upload it here.

Let us know :) .
My System SpecsSystem Spec

 Array of different BSOD's - NEW Sager Laptop LOGS inside

Thread Tools

Similar help and support threads
Thread Forum
Sager Laptop Battery Replacement?
I bought a laptop last year from xotic pc and it was a sager np2740 laptop. At first it was great and very fast. I bought this laptop because its very fast and because its light and smaller. Things were great with laptop then i had issue where the battery no longer worked after a few months. It has...
Hardware & Devices
BSOD idling machine, error logs inside
Hey all. I've recently had a machine blue screening, used to be perfectly fine. I think it's hardware failure. Tried to upload .dmp file but it said it was unable to upload.
BSOD Help and Support
Windows 7 installation presumably corrupt - CBS.logs inside
Hey, This is my first post on this forum and as the title says my Windows 7 files might be broken, atleast according to CMD -> sfc /scannow. Command prompt also asks me to refer to the CBS.logs for more information, but I can't comprehend any of the file's content. Could someone help me...
Windows Updates & Activation
New Sager Laptop Beeps Just like Old Asus Laptop
I have an old asus u45jc-a1 laptop. It has lot of problems like constant beeping and when connected to a monitor, it would many times monitor go to sleep. I tested this with several monitors and this happens with each monitor so i know its my laptop. Anyways, i went and bought a new sager...
General Discussion
New Sager Laptop, Want No Bloatware
Hey all i got the sager laptop and it looks pretty good. I had an asus u45jc-a1 but the laptop had lot of problems from being very slow and bloatware and many other issues. Laptop also was i3 so a bit slow and wanted an i7 quad core and this sager is i7 quad core. Its windows 7 home premium 64...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:09.
Twitter Facebook Google+