BSOD (MEMORY_MANAGEMENT, 0x0000001a)


  1. Posts : 1
    Windows 7 Ultimate x64
       #1

    BSOD (MEMORY_MANAGEMENT, 0x0000001a)


    Hey, since 2 days ago I'm getting BSOD's at seemingly random intervals.
    I've provided an SF Dump in the attachments, and here's the error;
    Code:
    Problem signature:
      Problem Event Name:	BlueScreen
      OS Version:	6.1.7601.2.1.0.256.1
      Locale ID:	1043
    
    Additional information about the problem:
      BCCode:	1a
      BCP1:	0000000000041790
      BCP2:	FFFFFA8000BF4180
      BCP3:	000000000000FFFF
      BCP4:	0000000000000000
      OS Version:	6_1_7601
      Service Pack:	1_0
      Product:	256_1
    
    Files that help describe the problem:
      C:\Windows\Minidump\112113-18876-01.dmp
      C:\Users\Simon\AppData\Local\Temp\WER-84490-0.sysdata.xml
    
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
    Any help would be greatly appreciated,
    Thanks in advance.
      My Computer


  2. Posts : 3,056
    Windows 10
       #2

    Welcome to SF Koak :) .
    The following quote details the best course of action at the moment;

    Arc said:
    Your crash dumps are not showing any finite probable cause.

    Test your RAM modules for possible errors.
    How to Test and Diagnose RAM Issues with Memtest86+
    Run memtest for at least 8 passes, preferably overnight.

    Arc said:
    First run it with all the existing/installed RAM modules. If it comes with no error, all is good.

    But if it starts showing errors, Stop testing. Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

    How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
    How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:
    No code has to be inserted here. It is a RAM, a bad RAM.

    But if you have got a result like that:
    No code has to be inserted here. It is a motherboard issue. The particular slot is bad.
    If memtest comes free from errors, enable Driver Verifier to monitor the drivers.
    Driver Verifier - Enable and Disable
    Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

       Information
    Why Driver Verifier:
    It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

    How Can we know that DV is enabled:
    It will make the system bit of slow, laggy.

       Warning
    Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

    If there is no points, make a System Restore Point manually before enabling DV.

       Tip



    Let us know the results, with the subsequent crash dumps, if any.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:27.
Find Us