BSOD randomly

CostCoin, Welcome to SF :) .
Unfortunately files are missing, so I'm not getting the full picture.
Please run the SFDT again and let it run its course it can take 15min at times to collect all the data necessary.
There should be eight files generated not including the dumps.

As things stand it appears there is an issue with the RAM, please test it.
Testing the RAM:

koolkat77 said:

Test and Diagnose RAM Issues with Memtest86+:

• RAM - Test with Memtest86+

   Tip

• Pay close attention to part 3 of the tutorial "If you have errors"
• Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

When done with the testing procedure take a picture and upload it here.

Yes mate I would go with YoYo and as an added try and to eliminate other stuff try reseating the RAM and GPU plus clean the slots (very gently).

It wouldn't hurt to redo the driver for that card either or these


https://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

https://www.sevenforums.com/tutorials/433-disk-check.html < DO NOT run on a SSD

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer
delete any rubbish thrown up and you may need to run this too
Free Malware Removal Tools scroll down to the TDSS Killer and run it at least these scans should eliminate some things and it doesn't take long either.

That means you have memory errors - the RAM chip/s must be replaced with new ones.

CostCoin said:

I got these just after starting the memTest. Not sure of what to make of it..

Hi, thanks for the update :) .
As much as most RAM errors are indeed with modules (sticks) themselves, I suggest you test whether
it is indeed the case you're facing and not a faulty slot.

Arc said:

But if it starts showing errors, Stop testing. Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:
No code has to be inserted here. It is a RAM, a bad RAM.

But if you have got a result like that:
No code has to be inserted here. It is a motherboard issue. The particular slot is bad.

Keep us posted :) .

CostCoin said:

I think I have to get new RAM sticks. I switched the RAM around into different slots and still get red lines of errors at memTest. So once I replace the RAM, the BSODs should stop?

That would be a significant step towards that :) .

Like the others said mate the RAM is shot full of holes and while you are atit before you replace the sticks try this - I always do this as the slots canalso be full of crud.

SLOTCLEANING

Now as for the slots to clean them use astrip of old credit card about 1/2 inch wide nip the corners off one end - preferably round them offhold a piece of thin lint free cloth over theend dab on some form of alcohol - isopropyl alcohol (what we swab the skin withbefore an injection) is good and GENTLYswipe along the slots.

This can also be done for the GPU slot/s.

This will give you the memory compatibility listings
ASUSTeK Computer Inc. -Support- Memory/Device Support (P8Z68-V) P8Z68-V LE&os=30&hashedid=lnde37J3Fxi4e68o

Another good site if you want to check out the best RAM and if you are up for G Skill RAM and Tradesman is a top fellow for advice
Welcome to the G.SKILL TECH FORUM you will need to sign up of course but it is a good reference site.