BSOD: IRQL Not Less or Equal

you posted the dumps only zip again

Be steady. Take some time to read it. Blue Screen of Death (BSOD) Posting Instructions. Then post the results here only, in your next post.

Please dont open another thread with the files.

Boot into Advanced Boot Options ..... choose "Safe Mode With Networking".

Run the SF diag tool, and upload the results.

If you cannot boot into safe mode too, let us know.

Boot to System Recovery Options . Try Safe Mode with Command Prompt. In the command prompt .... enter the command ....

start msconfig

It will open the system configuration window, with the "general" tab selected.

• Click the "startup" tab. Click "Disable all" > Apply > OK.
• Click on "services" tab. Check the "Hide all Microsoft Services"; Click "Disable all" > Apply > OK

Then try to boot again normally. Is it failing still?

If so, boot to System Recovery Options once again. Try Enable Boot Logging. It will create a file named ntbtlog.txt. Collect it and upload it. If you cannot do it within windows, Boot with a live Linux disc and collect it in a USB stick, use the usb stick in another computer and upload it. It is necessary.

skrillek said:

okay i did that and so far my system has not yet bsod.

Is not it a good news?

Your crash dumps are not showing any finite probable cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If memtest86+ does not show any error, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. This time, dont forget to post it following the Blue Screen of Death (BSOD) Posting Instructions. :)

Well, but if you take another test using Memtest86+, it would be better. It will consume some time on 16 GBs, but the end result will be more reliable than that the motherboard does itself.