BSOD Programs stop working

Hi Thugslc.

Try three things, one by one.

Boot into Safe Mode, free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.

1. Click on the Start button
2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
3. Select the “Startup” tab.
4. Deselect all items other than the antivirus.
5. Apply > OK
6. Accept then restart.

Then try to boot normally again. Does it stall crash instantly?

If so, remove the GPU and try to boot again. Can you? Does it behave the same?

If so, test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
_________________________________________________________________________________________

Code:

BugCheck 50, {fffff8bb0f3e0ab0, 0, fffff88013d570f8, 5}

Could not read faulting driver name
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ReferenceDmaBuffer+84 )

Followup: MachineOwner
--------------------------------------------------------------------------------------------
BugCheck A, {fffff6fb40080298, 0, 0, fffff80002d32eb7}

Probably caused by : memory_corruption ( nt!MiUnlockPageTableCharges+27 )

Followup: MachineOwner
---------------------------------------------------------------------------------------------
BugCheck 50, {fffff8bb0f3e0ab0, 0, fffff88013d570f8, 5}


Could not read faulting driver name
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ReferenceDmaBuffer+84 )

Followup: MachineOwner
---------