Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Random BSOD's over a month

01 Jan 2014   #1

Windows 7 Ultimate x64
Random BSOD's over a month

Been getting blue screens this month i have ran memtest, check disk and swapped out ram and hdd's rust to be safe and used driver versifier and still blue screens i am out of ideas

My System SpecsSystem Spec
02 Jan 2014   #2

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

Based on the bugchecks, I would recommend you follow and complete the steps given below:
1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.
Start Menu\Programs\ASUS\AI Suite II    Public:Start Menu\Programs\ASUS\AI Suite II    Public
2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot of your Hard Drives (s). Test your Hard Drives (s) running a Hard Drive Diag.

9. Test and Diagnose RAM issues with RAM - Test with Memtest86+. Pay close attention to Part 3 of the tutorial "If you have errors" Take the test for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

10. Monitor hardware temperature for overheating issues with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:

*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff80004424598, 0, fffff800034097d0, 0}

Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4518f )

Followup: MachineOwner

2: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arg1: fffff80004424598, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff800034097d0, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000000, (reserved)

Debugging Details:

Could not read faulting driver name

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030c2100
GetUlongFromAddress: unable to read from fffff800030c21c0
 fffff80004424598 Nonpaged pool

fffff800`034097d0 8b0dc2ad0100    mov     ecx,dword ptr [hal!HalpQueryPerformanceCounterOriginalSource (fffff800`03424598)]







TAG_NOT_DEFINED_c000000f:  FFFFF88002F94FB0

TRAP_FRAME:  fffff88002f8d9a0 -- (.trap 0xfffff88002f8d9a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=000000965fd7500f rbx=0000000000000000 rcx=0000010381738f0a
rdx=0002587b00000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800034097d0 rsp=fffff88002f8db30 rbp=0000000000000000
 r8=0000000000000000  r9=00000000003a21c8 r10=000000000002ab34
r11=fffff88002f65100 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz ac po nc
fffff800`034097d0 8b0dc2ad0100    mov     ecx,dword ptr [hal!HalpQueryPerformanceCounterOriginalSource (fffff800`03424598)] ds:fffff800`03424598=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002f08bf0 to fffff80002e8abc0

fffff880`02f8d838 fffff800`02f08bf0 : 00000000`00000050 fffff800`04424598 00000000`00000000 fffff880`02f8d9a0 : nt!KeBugCheckEx
fffff880`02f8d840 fffff800`02e88cee : 00000000`00000000 fffff800`04424598 fffff800`02e95f00 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x4518f
fffff880`02f8d9a0 fffff800`034097d0 : 00000000`00000010 00000000`00000246 fffff880`02f8db58 00000000`00000018 : nt!KiPageFault+0x16e
fffff880`02f8db30 fffff800`02e93786 : 00000000`003a21c8 00000000`00000000 fffff880`02f700c0 00000000`00000001 : hal!KeQueryPerformanceCounter+0xdc
fffff880`02f8db60 fffff800`02e8289c : fffff880`02f65180 fffff880`00000000 00000000`00000000 fffff880`04455480 : nt!PoIdle+0x5a7
fffff880`02f8dc40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x2c


nt! ?? ::FNODOBFM::`string'+4518f
fffff800`02f08bf0 cc              int     3


SYMBOL_NAME:  nt! ?? ::FNODOBFM::`string'+4518f

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


FAILURE_BUCKET_ID:  X64_0x50_nt!_??_::FNODOBFM::_string_+4518f

BUCKET_ID:  X64_0x50_nt!_??_::FNODOBFM::_string_+4518f

Followup: MachineOwner
My System SpecsSystem Spec

 Random BSOD's over a month

Thread Tools

Similar help and support threads
Thread Forum
Random BSOD Multiple times a month - zip attached
I've been having BSOD multiple times a month and they have become more frequent the past few months. I don't run any games on this computer just Visual Studio, Photoshop and other programs for work. I haven't noticed any patterns that let me pinpoint the issue. Any help is appreciated, thanks.
BSOD Help and Support
random BSOD when idle happened 4x within the month
Got BSOD and this latest message: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601. Locale ID: 1033 Additional information about the problem: BCCode: 124 BCP1: 0000000000000000
BSOD Help and Support
Random BSOD's for about a month now.
Hi been getting random crashes for about a month or so now. happens at random times, whilst doing different things. i have had different reasons for the BSOD too, irql_not_less_or_equal, system service exception and a few others motherboard- asus m5a99x evo amd 990x ddr3 graphics- HIS ATI...
BSOD Help and Support
Random BSOD on barely 6 month old pc
I have been experiencing a crash or two every month, randomly, with frequency increasing recently. I can be doing anything, spreadsheet, surfing internet, video, or music, and the computer crashes. Win 7 Home Premium x64 on my ~6 month old PC with original installation from OEM (HP).
BSOD Help and Support
Random BSOD at least once a month
I just got done building my first computer a couple of months ago and since then I have received about four BSODs that randomly happen at least once a month. From other sites I have heard it might be a memory problem but im not sure why it only crashes once a month. Please help me if you can....
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:35.
Twitter Facebook Google+