BSOD, error 0X000000F4

Thank you for taking the time to help me. Any information will be much appreciated.

I attached everything asked for in the guide. .



This BDOD was received from trying to: Do windows update to my computer and trying to remove two suspicious viruses using Microsoft Essentials. I also received a BSOD from using torrents.

The full error is STOP! 0X000000F4 (0x0000000000000003, 0xFFFFFA80093806A0, 0XFFFFFAB009380980, XFFFFF800035D6780)

Please post all the files here following: Blue Screen of Death (BSOD) Posting Instructions

Based on the bugchecks, I would recommend you follow and complete the steps given below:

1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot of your Hard Drives (s). Test your Hard Drives (s) running a Hard Drive Diag.

9. Test and Diagnose RAM issues with RAM - Test with Memtest86+. Pay close attention to Part 3 of the tutorial "If you have errors" Take the test for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

10. Monitor hardware temperature for overheating issues with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:

• Piriform - Speccy
• CPUID - HWMonitor

Daemon Tools/Alchohol is known to cause BSODs:
How to remove sptd.sys from system
Registry and SPTD problems | DAEMON Pro Help

Wow thanks a lot! I still have a couple steps to complete but here are the requested logs you asked for.

****Attachment 300653 ******
****Attachment 300906******
******Attachment 300932******



Attachment 300652