Getting frequent BSODs..tried everything

I've uploaded a file - q95aa.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it.
Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)
Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.
Pick the option to use a Command Prompt
At the prompt type
DIR C:\q95aa
hit the enter key - if you get a 'Not Found' error try
DIR D:\q95aa
or
DIR E:\q95aa

The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\q95aa <drive>:\windows\winsxs /y /i /s /v /h

(e.g.XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time)and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.
Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply.

The fix doesn't seem to have done anything - this is usually because the source files weren't put in the right place.

Please open an Elevated Command prompt and run the following command

DIR C:\q95aa
DIR C:\Windows\winsxs\q*.*

post the results.


Here are some instructions to make life easier :)
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.

Nope - that's the result I would expect. :)
It means that either yiu messed up the Repair Environment commands or the registry is damaged. Back in a bit..
.

All I can really suggest is that you repeat the instructions again. paying particular attention to the spacing, and to any error messages you get.

reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.
Pick the option to use a Command Prompt
At the prompt type
DIR C:\q95aa
hit the enter key - if you get a 'Not Found' error try
DIR D:\q95aa
or
DIR E:\q95aa

The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\q95aa <drive>:\windows\winsxs /y /I /s /v /h

(e.g.XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time)and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.
Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply.

Sorry - it's been a busy week!

The SFC scan shows that none of the files were replaced...

Code:

2014-01-09 12:10:25, Info                  CSI    00000313 [SR] Repairing 6 components
2014-01-09 12:10:25, Info                  CSI    00000314 [SR] Beginning Verify and Repair transaction
2014-01-09 12:10:25, Info                  CSI    00000315 [SR] Cannot repair member file [l:38{19}]"cmicryptinstall.dll" of Microsoft-Windows-CryptPluginInstaller, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:1122334455667788}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2014-01-09 12:10:25, Info                  CSI    00000316 [SR] Cannot repair member file [l:22{11}]"mskssrv.sys" of Microsoft-Windows-KernelStreamingSupport, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2014-01-09 12:10:25, Info                  CSI    00000317 [SR] Cannot repair member file [l:52{26}]"printfilterpipelinesvc.exe" of Microsoft-Windows-Printing-Spooler-FilterPipeline, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2014-01-09 12:10:25, Info                  CSI    00000318 [SR] Cannot repair member file [l:52{26}]"PrintFilterPipelineSvc.mof" of Microsoft-Windows-Printing-Spooler-FilterPipeline, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2014-01-09 12:10:25, Info                  CSI    00000319 [SR] Cannot repair member file [l:24{12}]"mscorier.dll" of NetFx-MSCORIER_DLL_NON_MUI, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2014-01-09 12:10:25, Info                  CSI    0000031a [SR] Cannot repair member file [l:18{9}]"TRAPI.dll" of Microsoft-Windows-trapi, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2014-01-09 12:10:25, Info                  CSI    0000031b [SR] Cannot repair member file [l:24{12}]"NAPCRYPT.DLL" of napcrypt, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing

The q*.* folder/file should not be present in the winsxs folder - it should only be present in the root C:\folder.

What is the exact command you're running in the repair environment?

Please run the following commands in an Elevated Command Prompt, and post the results.

Code:

 
ICACLS C:\Windows\winsxs
ICACLS C:\Windows\winsxs\amd64_microsoft-windows-cryptplugininstaller_1122334455667788_6.1.7600.16385_none_38472e7cf4db637f /T
ICACLS C:\Windows\winsxs\amd64_microsoft-windows-kernelstreamingsupport_31bf3856ad364e35_6.1.7600.16385_none_bde9acc8f46cb6db /T
ATTRIB C:\Windows\winsxs
ATTRIB C:\Windows\winsxs\amd64_microsoft-windows-cryptplugininstaller_1122334455667788_6.1.7600.16385_none_38472e7cf4db637f /S
ATTRIB C:\Windows\winsxs\amd64_microsoft-windows-kernelstreamingsupport_31bf3856ad364e35_6.1.7600.16385_none_bde9acc8f46cb6db /S
 
 .

Here are some instructions to make life easier :)
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.