Repeating BSOD under many different conditions

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

nusb3hub.sys Tue Aug 21 10:12:54 2012 (50330AC6)
NEC Electronics USB 3.0 Host Controller Driver (previous BSOD issues with 2010 and earlier versions)
Driver Reference Table - nusb3hub.sys

nusb3xhc.sys Tue Aug 21 10:12:55 2012 (50330AC7)
NEC Electronics USB 3.0 Host Controller Driver (previous BSOD issues with 2010 and earlier versions)
Driver Reference Table - nusb3xhc.sys

LGVirHid.sys Tue Nov 24 07:36:48 2009 (4B0B38B0)
Logitech Gamepanel Virtual HID Device Driver
Driver Reference Table - LGVirHid.sys

LGBusEnum.sys Tue Nov 24 07:36:48 2009 (4B0B38B0)
Logitech Keyboard
Driver Reference Table - LGBusEnum.sys

Then follow the steps below:

Code:

Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Fri Jan 10 01:49:31.806 2014 (UTC + 6:00)
System Uptime: 0 days 1:28:38.761
BugCheck D1, {fffff80040b9b8e0, 2, 0, fffff88001867a5d}
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
Probably caused by : memory_corruption
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Tue Jan  7 02:48:54.221 2014 (UTC + 6:00)
System Uptime: 0 days 0:16:00.127
BugCheck 109, {a3a039d8a3053697, b3b7465ef58205ed, fffff800039d6f70, 1}
Probably caused by : ntkrnlmp.exe ( nt!IopParseDevice+0 )
BUGCHECK_STR:  0x109
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Tue Jan  7 02:31:49.951 2014 (UTC + 6:00)
System Uptime: 0 days 0:00:44.856
BugCheck 1E, {ffffffffc0000005, fffff80003a127ea, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+16049 )
BUGCHECK_STR:  0x1E_c0000005_R
PROCESS_NAME:  ipoint.exe
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Tue Jan  7 02:30:00.027 2014 (UTC + 6:00)
System Uptime: 0 days 1:05:09.917
BugCheck 109, {a3a039d8a3216621, b3b7465ef59e3577, fffff80003997203, 1}
Probably caused by : memory_corruption
BUGCHECK_STR:  0x109
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Mon Jan  6 22:39:24.220 2014 (UTC + 6:00)
System Uptime: 0 days 2:34:00.126
BugCheck 109, {a3a039d8a3b12708, b3b7465ef62df65e, fffff800039b5f40, 1}
Probably caused by : ntkrnlmp.exe ( nt!NtAllocateVirtualMemory+0 )
BUGCHECK_STR:  0x109
PROCESS_NAME:  System
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

Based on the bugchecks, I would recommend you follow and complete the steps given below:

1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot of your Hard Drives (s). Test your Hard Drives (s) running a Hard Drive Diag.

9. Test and Diagnose RAM issues with RAM - Test with Memtest86+. Pay close attention to Part 3 of the tutorial "If you have errors" Take the test for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

10. Monitor hardware temperature for overheating issues with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:

• Piriform - Speccy
• CPUID - HWMonitor

Thanks for the update :)

too bad, do upload the new SF log.

There seem to be no dump after the 11th of this month?

Follow this tutorial Dump Files - Configure Windows to Create on BSOD to collect "small memory dumps"