BSOD not specific to loading but always within 5 min of cold start

Page 1 of 9 123 ... LastLast

  1. Posts : 57
    Windows 7 Pro x64
       #1

    BSOD not specific to loading but always within 5 min of cold start


    This is driving me crazy, I have a gaming rig which has been fine up until Dec 16.

    I did update some drivers with the IOrbit Driver program on that day.

    This is what happens, I get one BSOD from a cold boot within 5-15 minutes, This occurs wither or not I actually log onto windows, windows crashes and restarts and from then on everything is fine till the next cold boot, I'm thinking its temperature specific, because it has to be from a actual cold startup not a reboot or a shutdown and restart trigger.

    I have cleaned the fans, case, replugged the memory, reconnected all the cables, replaced the CPU heat sink, ran memory checks, disk checks, then since I had the SSD in there but not using it I just started over and reinstalled the original Win 7 pro 64 bit onto the SSD, reloaded the original Motherboard install drivers and let win update give me whatever it thought was needed.

    9 sec boot up ya! but.....

    no change as far as the BSOD rate, so it's apparently not a driver specific problem.

    This is my first Intel rig, I always used AMD before and I am stumped....

    Attached is the recommended SF diagnostic Tool report I called "SysDump1"

    This only has the last 3 mini dumps because I accidently erased a bunch of them via a cleaner program and didn't realize it till too late, give me a couple days and I will have more.

    Thank you for your time and consideration....

    Stephen
      My Computer


  2. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #2

    Uninstall IOBit...its a pile of rubbish and may be contributing to the issues.
    Code:
    fffff880`0a0e1268  fffff880`01de23caUnable to load image \SystemRoot\system32\DRIVERS\VirtuWDDM.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for VirtuWDDM.sys
    *** ERROR: Module load completed but symbols could not be loaded for VirtuWDDM.sys
     VirtuWDDM+0x23ca
    Code:
    VirtuWDDM    VirtuWDDM              Kernel        12/9/2013 7:09:16 AM
    Uninstall the LucidLogix software
    Code:
    fffff880`0a0e0fd0  fffff880`0f51efe7Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
     nvlddmkm+0xc6fe7
    Code:
    Name	NVIDIA GeForce GTX 670
    PNP Device ID	PCI\VEN_10DE&DEV_1189&SUBSYS_26733842&REV_A1\4&BAB4994&0&0008
    Adapter Type	GeForce GTX 670, NVIDIA compatible
    Adapter Description	NVIDIA GeForce GTX 670
    Adapter RAM	(1,048,576) bytes
    Installed Drivers	nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Driver Version	9.18.13.3182
    Search for an updated driver for your video card.....if none exists, install the Nvidia 314.22 WHQL driver - its very stable
      My Computer


  3. Posts : 57
    Windows 7 Pro x64
    Thread Starter
       #3

    uninstalled LucidLogix
    Upgraded to 332.21 for the GTX 670
    not running any auto background junk with Iorbit, just as a quick manuel cleaner or toolkit debug checks when needed.

    Did not crash this afternoon, but I may be moving too fast will recheck after work tonight.
      My Computer


  4. Posts : 57
    Windows 7 Pro x64
    Thread Starter
       #4

    Still something....


    Still crashed after work, with one of the usual BSOD KMODE_EXCEPTION_NOT_HANDLED errors

    ran SF diag result attached "SystemDumpII"

    This boot up was minus LucidMVP, and with latest GTX 670 Driver 332.21

    Thank you for your time and consideration,

    Stephen
      My Computer


  5. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #5

    Stephen, I'll be back in an hour or two and will look at the dmp then and advise :)
      My Computer


  6. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #6

    Code:
    fffff880`0927a0b8  fffff880`080e7f86Unable to load image \??\C:\Windows\system32\Drivers\bdfsfltr.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for bdfsfltr.sys
    *** ERROR: Module load completed but symbols could not be loaded for bdfsfltr.sys
     bdfsfltr+0x4f86
    WinDBG blames BitDefender......uninstall it and replace with MSE.

    Code:
    fffff880`0927a298  fffff880`0f526b1dUnable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
     nvlddmkm+0xc7b1d
    WinDBG still has issues with the video card driver.

    Lets revert to the 314.22 WHQL driver only. Uninstall the following Nvidia items in Control Panel > Programs and Features:

    - 3D Vision Control Driver
    - 3D Vision Driver
    - Graphics Driver
    - HD Audio Driver
    - PhysX
    - Nvidia Update

    Now follow Drivers - Clean Left over Files after Uninstalling
    Reboot. Go to Drivers - Download NVIDIA Drivers, Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:

    Attachment 301348

    Reboot. Use system as normal.
    Last edited by Golden; 12 Jan 2014 at 03:52. Reason: add Bitdefender pickup
      My Computer


  7. Posts : 57
    Windows 7 Pro x64
    Thread Starter
       #7

    Ummmm....ok, 314.22 graphics Driver and PhyXsys soft only. check
    Bit Defender??? have no clue, never used that program ever, and this windows is a fresh install less that 4 days ago.
    it is located in the correct place ...System32/Drivers has the right size 431,176 kB, Timestamp of Thrusday march 24, 2011 6:35:41 AM under the file Digital Signature Details.

    It must have came in the windows install CD or Windows update. Other than that I don't have a clue about it.
    Could be be a part of Windows Defender?


    However I am noting that windows is missing timestamps?
    also I am getting corrupted files, such as MechWarrior online errors out at times, they have a file checker program which says corrupted packet files and redownloads, but run it again and pop a different file is bad, run it again and it's another one.....

    Another example is I downloaded EA's Dragon age game day before yesterday nothing running in the background using amazon's downloader thingy, major 12 Gig's download which had corrupted files....had to redownload three times them manually 7z test each of the data files and put all the good ones together so the installer would work.

    This is something new going on as well.......everything before Dec 12 was solid now everything seems to be on a slant and I can't dial it in.

    Thanks again for your time and consideration,

    Stephen
      My Computer


  8. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #8

    Its unlikely that BitDefender came with a Windows update.....perhaps one of your other downloads? Its definitely not part of Windows Defender.

    Your other issues appear to be victims of the BSOD'ing going on, if that makes sense.....at least thats what I think at the moment.

    Upload the new dmp file if/when you get another BSOD
      My Computer


  9. Posts : 57
    Windows 7 Pro x64
    Thread Starter
       #9

    Ran it about 30 min this morning, one game this, one game that.....no errors so far

    very few downloads actually on this system, like I said 4 days old, I got TiVo desktop which I only toggle on when I need it, autorun a desktop program called EarthDesk only as a pretty which I unload that when I game for it updates in the background.

    Adobe Air for Pandora when I use it < rarely > then I got World of Tanks, World of Warplanes, MechWarrior Online, War Thunder, Dragon Age in fact since I was having trouble downloading I had kept a backup copy of the WoT, and WoW, War Thunder....I launched their respective installer and when it started downloading I exited, copyed the backup game into its place and relaunched the launcher and presto all done! Dragon Age would not let me do that....so I had to redownload it.

    But BitDefender? I really don't know where that came from.

    I will check on it again tonight after work again,

    I'm feeling hopeful, thanks again!

    Stephen
      My Computer


  10. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #10

    No worries. I'll keep stopping by here.
      My Computer


 
Page 1 of 9 123 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:14.
Find Us