Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD during general use, downloading, code a

19 Jan 2014   #1

Windows 7 64x
BSOD during general use, downloading, code a

Was downloading some updates, got bsod.

Had previous problems with BSOD'ing but I reformatted due to them, problem still persists. I ran a memtest and no problems. Using a new hard drive I just bought.

I would BSOD at least once per day during general use/bootup. It's been a reoccuring problem.

My System SpecsSystem Spec
19 Jan 2014   #2

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit


For how many passes did you run memtest?

Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Usra\Downloads\layolan\SF_18-01-2014\011814-21546-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0x8281c000 PsLoadedModuleList = 0x82964810
Debug session time: Sun Jan 19 07:24:30.517 2014 (UTC + 6:00)
System Uptime: 0 days 0:04:29.001
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck A, {7c9fffec, 2, 1, 828a81d8}

Probably caused by : memory_corruption ( nt!MiRemoveAnyPage+138 )

Followup: MachineOwner

0: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arg1: 7c9fffec, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: 828a81d8, address which referenced memory

Debugging Details:

WRITE_ADDRESS: GetPointerFromAddress: unable to read from 82984718
Unable to read MiSystemVaType memory at 82964160


828a81d8 f00fba2800      lock bts dword ptr [eax],0




PROCESS_NAME:  332.21-desktop

TRAP_FRAME:  8ee6179c -- (.trap 0xffffffff8ee6179c)
ErrCode = 00000002
eax=7c9fffec ebx=7c9fffec ecx=00000002 edx=00000001 esi=7c9fffe4 edi=84fdf808
eip=828a81d8 esp=8ee61810 ebp=8ee61868 iopl=0         nv up ei pl zr na pe nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010246
828a81d8 f00fba2800      lock bts dword ptr [eax],0   ds:0023:7c9fffec=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from 828a81d8 to 828627eb

8ee6179c 828a81d8 badb0d00 00000001 85208ea8 nt!KiTrap0E+0x2cf
8ee61868 828b0273 00000002 00000000 a5773540 nt!MiRemoveAnyPage+0x138
8ee61890 8287e878 00000005 00000000 a0d61000 nt!MiGetPage+0x28a
8ee6194c 828aec17 a60e7000 02a5fb40 00000000 nt!MmCopyToCachedPage+0x56a
8ee619e0 828b1bfc 85208ea8 02a5fb40 8ee61a30 nt!CcMapAndCopyInToCache+0x1f0
8ee61a38 8b2364d2 85221418 8ee61b1c 001082a5 nt!CcCopyWrite+0x1d9
8ee61b48 8b23785f 8518b9b0 8518b008 05c050ae Ntfs!NtfsCommonWrite+0x22e9
8ee61bc0 828584bc 85f5b020 8518b008 8518b008 Ntfs!NtfsFsdWrite+0x2e1
8ee61bd8 8b11520c 85f63c20 8518b008 00000000 nt!IofCallDriver+0x63
8ee61bfc 8b1153cb 8ee61c1c 85f63c20 00000000 fltmgr!FltpLegacyProcessingAfterPreCallbacksCompleted+0x2aa
8ee61c34 828584bc 85f63c20 8518b008 8518b008 fltmgr!FltpDispatch+0xc5
8ee61c4c 82a59eee 85221418 8518b008 8518b1e0 nt!IofCallDriver+0x63
8ee61c6c 82a5a7a2 85f63c20 85221418 00000001 nt!IopSynchronousServiceTail+0x1f8
8ee61d08 8285f42a 85f63c20 00000000 00000000 nt!NtWriteFile+0x6e8
8ee61d08 77a064f4 85f63c20 00000000 00000000 nt!KiFastCallEntry+0x12a
WARNING: Frame IP not in any known module. Following frames may be wrong.
029ffb48 00000000 00000000 00000000 00000000 0x77a064f4


828a81d8 f00fba2800      lock bts dword ptr [eax],0


SYMBOL_NAME:  nt!MiRemoveAnyPage+138

FOLLOWUP_NAME:  MachineOwner



IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  0xA_nt!MiRemoveAnyPage+138

BUCKET_ID:  0xA_nt!MiRemoveAnyPage+138

Followup: MachineOwner
Please run it again.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Do this test overnight, before going to bed.
My System SpecsSystem Spec
19 Jan 2014   #3

Windows 7 64x

Quote   Quote: Originally Posted by koolkat77 View Post

I'm not sure. I'll leave it go for a bit longer, thanks.
My System SpecsSystem Spec

20 Jan 2014   #4

Windows 7 64x

BUMP, I ran the test for longer. No errors, still getting blue screens.

More Code A
My System SpecsSystem Spec
20 Jan 2014   #5

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

Upload new SF log.
My System SpecsSystem Spec
21 Jan 2014   #6

Windows 7 64x

Quote   Quote: Originally Posted by koolkat77 View Post
Upload new SF log.
My System SpecsSystem Spec
21 Jan 2014   #7

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Stop editing the original post. How one will determine which one is the latest files in that crowd??

Upload the zip and attach it with your subsequent post only.
My System SpecsSystem Spec

 BSOD during general use, downloading, code a

Thread Tools

Similar help and support threads
Thread Forum
BSOD (During general browsing, file explorer, general use)
Hello I have received a BSOD numerous times. The first series of blue screens would happen almost on a daily basis. I resolved that frequent occurrence by changing the SATA cable on my SSD. I experienced one BSOD today, after being free of them for a month. I do not know if this BSOD is related to...
BSOD Help and Support
Trouble downloading the new Windows Updates, code 80073712
Windows 7 Home Premium 64 bit I ran the SFC /SCANNOW command, and says that there were corrupt files and couldn't repair them. I also ran the System Update Readiness Tool before doing this step. I've attached the CBS .rar file. Thanks for your help! ...
Windows Updates & Activation
Important updates not downloading (code 80070B9)
I have tried downloading 2 important security updates (KB2446710 & KB2478662) and get the following error message Code 80070BC9. I have tried rebooting in clean boot mode but still have the same message, can anyone help. Thanks
Windows Updates & Activation
Mulitple BSOD while downloading on Steam and general internet
I've been having multiple BSOD errors such as 0x1E, 0x3B, etc. I've also had problems with Windows randomly freezing and/or restarting without a BSOD. I've attached the latest dump file in the hopes that someone can help. My profile has the major of my computer components in it but I'll post...
BSOD Help and Support
BSOD General browsing and downloading a 58mb file
Hi Folks, I have been getting random BSODs for a while now. Probably one every week or fortnight. It always points to a driver called ntoskrnl.exe It is a relatavly new computer and I am now at a loose end. I have attached the minidump file. I hope to hear from you soon and If I get it...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:53.
Twitter Facebook Google+