Random BSODs

Hello!

First, sorry for probably bad English. There has been random BSODs a very long time (probably first BSOD about year ago). There's a screenshot of BlueScreenView about last BlueScreens: View image: bluescreens

Memtest is done about 20 times, with no errors. Last few days there has been some problems when starting the computer, first time starting computer there appears BlueScreen or computer just restarts itself. Then, after restarting 2-5 times, computer keeps on running normally.

Some specs of my computer:
AMD Phenom(tm) II X6 1055T Processor (6 CPUs), ~2,8GHz
Windows 7 Home Premium 64-bit
Gigabyte GeForce GTX 460
CORSAIR PSU 550W 12CM ATX V2.2

Temperatures should be ok, 39-58°C at the moment. Could the problem be in motherboard, GPU, power..? Please help. I have tried to get help many times, nobody can't tell how to fix this yet.

Hi kasotol.

Uninstall AVG following their guide: http://www.avg.com/us-en/utilities

Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one; as the installed antivirus never was able to complete the scans without a BSOD.

BTW, memtest should be counted based on passes, not on times. How many continuous passes you ran memtest86+? It is suggested to run memtest86+ for at lease 8 consecutive passes.

kasotol said:

Thanks for helping. Do you mean that AVG cannot complete the scan without a BSOD? I think it can do that, when I start it manually.

All the BSOD reports AVG as the program running in the background when the BSODs took place.

kasotol said:

Arc said:

Uninstall AVG following their guide: http://www.avg.com/us-en/utilities

Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one; as the installed antivirus never was able to complete the scans without a BSOD.

Done, done & done.

Again, 5 minutes ago, cold startup and BSOD!

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Code:

STACK_COMMAND:  kb

CHKIMG_EXTENSION: !chkimg -lo 50 -db !nt
2 errors : !nt (fffff80003549a8c-fffff80003549aa4)
fffff80003549a80  41  8b  55  00  41  3b  d6  74  1b  48  8b  4c *04  50  48  8b A.U.A;.t.H.L.PH.
...
fffff80003549aa0  8b  44  24  40 *41  89  75  00  48  8b  5e  20  49  c7  04  24 .D$@A.u.H.^ I..$

MODULE_NAME: memory_corruption

IMAGE_NAME:  memory_corruption

FOLLOWUP_NAME:  memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MEMORY_CORRUPTOR:  STRIDE

FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_STRIDE

BUCKET_ID:  X64_MEMORY_CORRUPTION_STRIDE

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:x64_memory_corruption_stride

FAILURE_ID_HASH:  {54f6a81e-bd17-9afc-f167-0352818951c1}

Followup: memory_corruption
---------

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.

One think you may do, assuming some drivers are passing bad information to the memory.

Enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.