BSOD 0x00000050 as Windows Desktop Loads


  1. Posts : 1
    Wi
       #1

    BSOD 0x00000050 as Windows Desktop Loads


    Thank you for taking the time to read this thread.

    Several weeks ago I began experiencing a BSOD each time my desktop would try to load in normal mode. I think the cause may stem from when I accidentally installed a 32-bit program on my 64-bit copy of Window's 7. Once I realized that I had installed the wrong software version (32-bit), I reinstalled the same program using the correct 64-bit setup file. I do not recall if I did, or did not, uninstall the 32 bit version before installing the 64 bit version.

    I've tried to uninstall this program numerous times - both the 32 and the 64 bit versions are still on my PC because the 'uninstall programs' feature under the control panel fails to remove either version. Please keep in mind that the installation of this program might have nothing to do with my BSOD, and may merely be a coincidence.

    Windows restore has failed a few times, and even so I can only restore to the point where I installed the 32 bit program. I've run Malware Bytes, AVG and Avast to no avail.

    Attached is an image to one of the two BSOD's that I have been experiencing: Page_Fault_In_Unpaged_Area. The other BSOD says roughly 'Unable_To_Write_To_Paged_File'

    I have downloaded the programs that I understand this forum uses to diagnose such errors and am ready to provide whatever information might be necessary to solve this dilemma. I've been having trouble retrieving system information, but here's roughly what I'm working with:

    Intel 64 bit processor
    Windows 7 OS
    2x2GB Ram - GSkill DDR3
    Nvidia 9600

    My apologies if this post is not as concise as it could be. Any insight on what may be the culprit here or how to fix such a problem would be extremely appreciated. I hope that in the event the issue can be resolved, this post provide guidance and assistance to a future troubleshooter.

    Attachment 305632
      My Computer


  2. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit
       #2

    Hi Tres821.

    Can you start the computer in Safe mode? If so, post it following the Blue Screen of Death (BSOD) Posting Instructions.

    Also, test your RAM modules for possible errors.
    How to Test and Diagnose RAM Issues with Memtest86+
    Run memtest for at least 8 passes, preferably overnight.

    If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 21:58.
Find Us