Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Blue Screen 0x00000050 PAGE_FAULT_IN_NONPAGED_AREA Error

26 Feb 2014   #1

Windows 7 Ultimate 32 Bit
Blue Screen 0x00000050 PAGE_FAULT_IN_NONPAGED_AREA Error

My computer just keeps random shutting down and never leaves a blue screen but this time its done a blue screen with the code in the title. What should I do ive ran the "SF Diagnostic Tool" and ill add the .ZIP file too a attachment.
Thanks Bran

My System SpecsSystem Spec
26 Feb 2014   #2

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit

Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Usra\Downloads\Branston\SF_27-02-2014\022714-18595-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*
Executable search path is: 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18247.x86fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0x82e42000 PsLoadedModuleList = 0x82f8b4d0
Debug session time: Thu Feb 27 06:37:44.049 2014 (UTC + 6:00)
System Uptime: 0 days 7:00:45.844
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 50, {c6c7f348, 0, 82efe322, 2}

Probably caused by : memory_corruption ( nt!MiGetWorkingSetInfo+23f )

Followup: MachineOwner

0: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arg1: c6c7f348, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 82efe322, If non-zero, the instruction address which referenced the bad memory
Arg4: 00000002, (reserved)

Debugging Details:

READ_ADDRESS: GetPointerFromAddress: unable to read from 82fab84c
Unable to read MiSystemVaType memory at 82f8ae20

82efe322 8b4a18          mov     ecx,dword ptr [edx+18h]





PROCESS_NAME:  chrome.exe


TRAP_FRAME:  9d6ffbb0 -- (.trap 0xffffffff9d6ffbb0)
ErrCode = 00000000
eax=9acf98f4 ebx=00000fff ecx=00080000 edx=c6c7f330 esi=852b9030 edi=8549c0c0
eip=82efe322 esp=9d6ffc24 ebp=9d6ffc78 iopl=0         nv up ei ng nz na pe nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010286
82efe322 8b4a18          mov     ecx,dword ptr [edx+18h] ds:0023:c6c7f348=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from 82e82aa8 to 82ecf879

9d6ffb98 82e82aa8 00000000 c6c7f348 00000000 nt!MmAccessFault+0x104
9d6ffb98 82efe322 00000000 c6c7f348 00000000 nt!KiTrap0E+0xdc
9d6ffc78 8309ec18 c08115fc 84f5a6a8 b82780e6 nt!MiGetWorkingSetInfo+0x23f
9d6ffd14 82e7f8c6 00000430 00000000 00000001 nt!NtQueryVirtualMemory+0x196
9d6ffd14 776970f4 00000430 00000000 00000001 nt!KiSystemServicePostCall
WARNING: Frame IP not in any known module. Following frames may be wrong.
062cf484 00000000 00000000 00000000 00000000 0x776970f4


82efe322 8b4a18          mov     ecx,dword ptr [edx+18h]


SYMBOL_NAME:  nt!MiGetWorkingSetInfo+23f

FOLLOWUP_NAME:  MachineOwner



IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  0x50_nt!MiGetWorkingSetInfo+23f

BUCKET_ID:  0x50_nt!MiGetWorkingSetInfo+23f

Followup: MachineOwner
Start with Memtest. Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Do this test overnight, before going to bed.
My System SpecsSystem Spec

 Blue Screen 0x00000050 PAGE_FAULT_IN_NONPAGED_AREA Error

Thread Tools

Similar help and support threads
Thread Forum
Please help me with my problem. It is a BSOD problem that doesn't wan't to go, like other times after just a restart everything was fine. All i know of where it is the problem from searching on Internet is this, "PAGE_FAULT_IN_NONPAGED_AREA, error 0x00000050". If more details are...
BSOD Help and Support
Blue Screen Error 0x00000050
Hi I am getting an error PAGE_FAULT_IN_NONPAGED_AREA, caused by driver - ntoskrnl.exe, bug check code- 0x00000050 . I have tested my RAM using memtest and my main harddrive, I am still not sure what caused the blue screen. My System is newly built and the blue screen didn't occur until like 10...
BSOD Help and Support
i have blue screen problem since i bought my comp the problem increase when i play games every 2-3 hours :(:( i Re installed my amd driver many times and updated directx but still problem i hope your help and sorry for my bad english
BSOD Help and Support
BSOD Randomly Error code 0X00000050 PAGE_FAULT_IN_NONPAGED_AREA
HI: Im getting the BSOD randomly using windows 7 ultimate home edition 64Bit some times it does it while on idle and some times it does a few minutes after reboot please see attached files any help is greatly appreciated thanks
BSOD Help and Support
My computer is old 10 days: i5 processor gigabyte p67a mainboard 6gb of ddr3 ram memory - 4db and 2gb Windows 7 Ultimate x64 Please help
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:47.
Twitter Facebook Google+