Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BCOD at a high rate, ntoskrnl.exe at fault?

28 Feb 2014   #1

Windows 7
BCOD at a high rate, ntoskrnl.exe at fault?

Hi, i have been having regular crashes which sometimes lead into BSOD or necessitate hard restarts. I did some reading and used bluescreenview which showed that ntoskrnl.exe may be the cause of the crashes in the past few instances. I have re-installed win7 and the problem persists. Would someone shed light on this issue im having? I am also currently trying to provide the SevenForums Diag tool data, but am getting an error. However, it us currently working, so i will upload it when it finishes. Thanks

edit; silly me, didnt follow directions for diag tool, do continue.

My System SpecsSystem Spec
28 Feb 2014   #2

Windows 7

this post detailed the error i was getting from the diag tool, but i have since properly installed it and uploaded the results. i am still in need of advice regarding my pc. i have attached an updated diag tool result zip to this comment.
My System SpecsSystem Spec

 BCOD at a high rate, ntoskrnl.exe at fault?

Thread Tools

Similar help and support threads
Thread Forum
Stuttering sound - dxgkrnl.exe high ISR rate
Hi, I have audio stutterings since I foolishly tried to install windows 8.1 6 months ago, reinstalled windows 7 since I didn't have stuttering in that, still having the problem. I have installed all drivers/updated bios and I am lost now. EDIT: It stutters randomly, every once in a while My...
Hardware & Devices
Mouse high polling rate worse?
Hi guys I'm new here but anyways... I got a new mouse recently and in the drivers there was an option to change polling rate, from what i read almost everyone says higher is better, so I think okay I'll change it to 1000hz. With my old mouse i think it was 125hz and 800dpi by default. But then...
Hardware & Devices
Low bit rate only available for a high definition audio device.
I have a PNY 570 gtx videocard hooked up with a HDMI to monitor. No matter if I connect it to a audio receiver or to the monitor I only get a maximum of 2 channels and Bit Depths 16-bit. Sample rates are only shown as 44.1kHz and 48.0kHz and the HDMI jack only shows L and R. It wont let me...
Sound & Audio
High Refresh Rate LCD/LED Monitors For Gaming
Ever since I retired my huge CRT monitor, I have been very unsatisfied with the performance of my 75Hz maximum LED monitor. Don't get me wrong, it's great for movies and everyday use, but for gaming it has done nothing but leave me yearning for something with a higher refresh rate. I see that...
Graphic Cards
Slow transfer rate, high noise
I'm using a RALINK RT61 Turbo wifi adapter and i get a maximum transfer rate of 20KB/s. I have tried all possible drivers for the RT256x chipset and tested it on linux with no change in performance. When i use a vista drivers for windows 7, Ralink wifi manager says that i got a 70% noise level....
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:39.
Twitter Facebook Google+