Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD after exporting from music DAW

09 Mar 2014   #1

Windows 7 Ultimate x64
BSOD after exporting from music DAW

Hi there, I've been getting lots of bsod since around xmas to the point where it was so bad I done a clean install of win 7 x64. and after that I still was continuing to get bsod which that lead me to believe it was hardware related so I removed my ram sticks n tried each one at a time adding them back in t see if it was faulty ram and for around 2 months I thought I had found the problem and that it was one of the ram sticks because I was no longer getting any blue screens.

I'm a music producer and i use fl studio 11 software and now more often than not I am getting a bsod when I export a track when it gets to 100%. I only just tonight finally was able to produce a minidump after using the cmd method shown in one of the threads on here as before I wasnt even after setting it up properly

Anyway I have attached the zip file with the info from the diagnostic tool and I hope someone will be able to help me

thanks in advance

My System SpecsSystem Spec
10 Mar 2014   #2

Windows 10 Pro

How are things in safe mode?

Is it only when you use the FL studio software?

What are your full pc specs?
My System SpecsSystem Spec
11 Mar 2014   #3

Microsoft Community Contributor Award Recipient

Win 10 Pro x64


Your dump is pointing to,

BugCheck 50, {ffffffff89992e20, 0, fffff80002eb0798, 5}

Unable to load image MAudioFastTrackPro.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for MAudioFastTrackPro.sys
*** ERROR: Module load completed but symbols could not be loaded for MAudioFastTrackPro.sys

Could not read faulting driver name
Probably caused by : MAudioFastTrackPro.sys ( MAudioFastTrackPro+6663 )

Followup: MachineOwner
Driver Reference Table - MAudioFastTrackPro.sys

start             end                 module name
fffff880`06f3b000 fffff880`06f6a000   MAudioFastTrackPro T (no symbols)           
    Loaded symbol image file: MAudioFastTrackPro.sys
    Image path: MAudioFastTrackPro.sys
    Image name: MAudioFastTrackPro.sys
    Timestamp:        Thu May 23 05:56:01 2013 (519E11E1)
    CheckSum:         00039242
    ImageSize:        0002F000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
You could try updating that,

M-AUDIO - Drivers and Software Search

A little info on the BugCheck,

Bug check 0x50 usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, be it main memory, L2 RAM cache, or video RAM).
Another common cause is the installation of a faulty system service.
Antivirus software can also trigger this error, as can a corrupted NTFS volume.
Testing your Ram would be a good idea too.

information   Information

Run a minimum of 8 passes, preferably overnight, or until errors occur using MemTest86+.

Use this tutorial to help you use MemTest86+:
RAM - Test with MemTest86+
My System SpecsSystem Spec

13 Mar 2014   #4

Windows 7 Ultimate x64

i figured it out on my own in the end came to same conclusion as you also found a forum thread with loads of ppl having similar issues with the drivers for win 7 and that interface and i think because the product is a about 5 years old now n avid buying over m-audio avid are not really bothered about doing a proper working no buggy driver for the fast track range

so only option is to buy a new interface which i have done thanks for the reply anyway :)
My System SpecsSystem Spec
13 Mar 2014   #5

Microsoft Community Contributor Award Recipient

Win 10 Pro x64

You're welcome, glad you found a new interface. :)
My System SpecsSystem Spec

 BSOD after exporting from music DAW

Thread Tools

Similar help and support threads
Thread Forum
Exporting contacts to Tablet
I have been given a Tablet and would really like to import all my contacts from Windows Live Mail and my web addresses in IE but can't seem to do this. I've exported to my desktop to see if that's the answer but it isn't! Any help that can be given will be appreciated. Thank you Iris
Browsers & Mail
BSOD When Exporting from Premiere Pro - BCCode:101
I have been getting BSOD a lot when exporting video from premiere pro cs6, sometimes the computer will just freeze and I will have to restart it. Any solutions that will solve this problem are greatly appreciated! Here is all the information I can provide: OS Name Microsoft Windows 7...
BSOD Help and Support
Premiere cs3 - Exporting mp3's
I use Premiere Pro CS3 sometimes to edit audio. I am having trouble exporting as mp3's. The only thing that I can think of is that CS3 does not have the capability to export MP3's. I tried exporting using the two options: Audio and Media Encoder with no luck.
exporting WLM data
Does anyone know how I'd export my all my accounts, messages, contacts etc from WLM to Mozilla Thunderbird please? It seems to give an option for the late lamented Outlook Express, but none for Windows Live Mail. Any help greatly appreciated.
Browsers & Mail
Exporting WMP12 library
I would like to be able to export a summary of all the metadata of my music library. I know that past versions of WMP had a powertoy for that, but I was unable to find one for version 12. Does anybody know a way to do this? Also, where is the library file located anyway? Thanks.
Music, Pictures & Video

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:14.
Twitter Facebook Google+