New Build, Multiple BSOD, Unknown error code

Page 7 of 10 FirstFirst ... 56789 ... LastLast

  1. Posts : 73
    Microsoft Windows 7 64-bit 7600
    Thread Starter
       #61

    So I have been able to successfully install all available windows updates with just 1 stick installed in dimm 4, the machine hasn't locked up or exhibited any of the symptoms it was before with 2 sticks installed.

    I think it's deff the board. But just to be sure I will run 1 final Test tomorrow with both sticks installed in dimm 1 and dimm 3.

    Thanks for all your responses guys. Much appreciated.
      My Computer


  2. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #62

    you're welcome.
      My Computer


  3. Posts : 73
    Microsoft Windows 7 64-bit 7600
    Thread Starter
       #63

    Ok, guys i've put it to run the final test with both sticks in, DIMM 1 and DIMM 3, we'll see what happens.
      My Computer


  4. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #64

    OK, good deal. :)
      My Computer


  5. Posts : 73
    Microsoft Windows 7 64-bit 7600
    Thread Starter
       #65

    Gentlemen we have lift off.
      My Computer


  6. Posts : 73
    Microsoft Windows 7 64-bit 7600
    Thread Starter
       #66

    Ok just because I'm a paranoid SOB I threw the ram in another machine I had laying around and tested it over night, 8 passes no errors so far. So I think we could safely say it was the board for sure. I already RMA'd the board, UPS should be comping by soon to get it. I'll let you guys know once I get the new board back how it goes. Probably around 1 week return time.
      My Computer


  7. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #67

    ddg5006 said:
    Gentlemen we have lift off.
    That is what I expected would happen. I would say you're 99% right about the board being bad. For some reason it just can't handle having 2 slots populated.
    Thanks for working through with all the "silly" requests.
      My Computer


  8. Posts : 73
    Microsoft Windows 7 64-bit 7600
    Thread Starter
       #68

    so far 9 passes no errors
      My Computer


  9. Posts : 73
    Microsoft Windows 7 64-bit 7600
    Thread Starter
       #69

    Britton30 said:
    ddg5006 said:
    Gentlemen we have lift off.
    That is what I expected would happen. I would say you're 99% right about the board being bad. For some reason it just can't handle having 2 slots populated.
    Thanks for working through with all the "silly" requests.

    No problem, I really appreciate all your guys or gals help.
      My Computer


  10. Posts : 73
    Microsoft Windows 7 64-bit 7600
    Thread Starter
       #70

    It's Back =****(


    So i got a new board from RMA'ing the old one, hooked everything up hoping for the best. Not even 5 min with the board in and it blue screens. I'm starting to get very upset with this build. Ran the SF tool the info is below. I don't know what to do now. I'm at a loss. I hope it's not another bad board. I also included a pic of what the actual BS is.
      My Computer


 
Page 7 of 10 FirstFirst ... 56789 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:09.
Find Us