Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple Different BSODs Custom PC

20 Apr 2014   #71
Thedoctor44

 

No those dump files aren't much use because they're old.

Can you just upload dump files that are created from driver verifier.
Just run it as usual.


My System SpecsSystem Spec
.
20 Apr 2014   #72
Svyn

Windows 8.1
 
 

Got a brand new BSOD that I've never seen before. Got it while I was watching a series, full-screened, in Google Chrome. Verifier was running at the time it BSOD, I will continue to keep it running.
My System SpecsSystem Spec
21 Apr 2014   #73
Thedoctor44

 

The bugcheck you have indicates special pool corruption which has been caused by the special pool option from Driver Verifier.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION (c1)
Special pool has detected memory corruption.  Typically the current thread's
stack backtrace will reveal the guilty party.
Arguments:
Arg1: fffff98052b02ee0, address trying to free
Arg2: fffff98052b0227e, address where one bit is corrupted
Arg3: 0000000000330118, (reserved)
Arg4: 0000000000000032, caller is freeing an address where nearby bytes within the same page have a single bit error
Parameter 1 is the one we're most interested in as this indicates the address was trying to be freed.

Code:
Pool page fffff98052b02ee0 region is Unknown
GetUlongFromAddress: unable to read from fffff80003873a38
fffff98052b02000 is not a valid small pool allocation, checking large pool...
unable to get pool big page table - either wrong symbols or pool tagging is disabled
fffff98052b02000 is freed (or corrupt) pool
Bad previous allocation size @fffff98052b02000, last size was 0

***
*** An error (or corruption) in the pool was detected;
*** Pool Region unknown (0xFFFFF98052B02000)
***
*** Use !poolval fffff98052b02000 for more details.
***
We can see this pool page is corrupted so we should take it a bit further.

Code:
Pool page fffff98052b02000 region is Unknown

Validating Pool headers for pool page: fffff98052b02000

Pool page [ fffff98052b02000 ] is __inVALID.

Analyzing linked list...


Scanning for single bit errors...

None found
There's not much information here so we'll need to continue.

Code:
   +0x000 PreviousSize     : 0y00011000 (0x18)
   +0x000 PoolIndex        : 0y00000001 (0x1)
   +0x000 BlockSize        : 0y00110011 (0x33)
   +0x000 PoolType         : 0y00000000 (0)
   +0x000 Ulong1           : 0x330118
   +0x004 PoolTag          : 0x2b707249
   +0x008 ProcessBilled    : (null) 
   +0x008 AllocatorBackTraceIndex : 0
   +0x00a PoolTagHash      : 0
The Previous Page is wrong as it should be 0 because 0 is non paged pool and 1 is paged pool.
non paged pool is space within memory that contains information for kernel objects such as device drivers.

Code:
rax=0000000000000000 rbx=0000000000000000 rcx=0000000009175000
rdx=0000000066e38f70 rsi=0000000000000000 rdi=0000000000000000
rip=0000000072f02e09 rsp=0000000004b2eb68 rbp=00000000063ef8d4
 r8=000000000000002b  r9=00000000778cf959 r10=0000000000000000
r11=0000000000000246 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
0033:00000000`72f02e09 ??              ???
Now the registers are corrupt or are unavailable so I can't go any further.

Can you try disabling the special pool option in Driver Verifier?
My System SpecsSystem Spec
.

21 Apr 2014   #74
Svyn

Windows 8.1
 
 

How do I disable that part?
My System SpecsSystem Spec
22 Apr 2014   #75
Thedoctor44

 

Just disable it and follow these instructions

Driver Verifier - Enable and Disable

You must have selected individual settings from a list.
My System SpecsSystem Spec
22 Apr 2014   #76
Svyn

Windows 8.1
 
 

Yet another Memory Corruption BSOD while gaming.
My System SpecsSystem Spec
22 Apr 2014   #77
Thedoctor44

 

Driver Verifier will have to be enabled again because if your RAM isn't faulty memory corruption will be caused by drivers most of the time.

This is getting really tough, if driver verifier doesn't pick up the culprit soon I'm afraid I'll soon be all out of ideas.
My System SpecsSystem Spec
22 Apr 2014   #78
Svyn

Windows 8.1
 
 

That BSOD was caused when Driver Verifier was running. I still have it running, it's been running for the past 3 days straight.

Edit: Is it possible that it's being caused by GPU memory?
My System SpecsSystem Spec
22 Apr 2014   #79
Thedoctor44

 

If it is memory corruption then yes, it can be caused by video RAM.

The reason I asked is that most of the time Driver Verifier will create "driver verifier" bugchecks, mainly 0xC4 or 0xC5 bugchecks I believe.
My System SpecsSystem Spec
24 Apr 2014   #80
Svyn

Windows 8.1
 
 

I'm getting them every hour basically.
My System SpecsSystem Spec
Reply

 Multiple Different BSODs Custom PC




Thread Tools




Similar help and support threads
Thread Forum
Lenovo T440s, multiple BSODs. Hardware replaced but BSODs continue
Thanks in advance for any advice. The BDODs appear to be of multiple types. Motherboard, RAM, wireless card and SSD were all replaced in early October and system completely reinstalled but BSODs continue. They are more likely to occur 1-2 min after waking from sleep, but recently also occurred...
BSOD Help and Support
Multiple BSODs from multiple apps PAGE_FAULT_IN_NONPAGED_AREA
Hi. Last year, I bought a new PC for graphical software and gaming. From the beggining it had problems (I was recieving BSODs), so, I tested RAMs. It resulted that RAMs we're bad. I returned them in warrantly. (The PC was assembled by the shop, components we're choosen by me so that aren't any...
BSOD Help and Support
Multiple BSODs, Multiple Bugchecks (0xD1, 0x3B, 0x50, 0x0A)
I've been having BSOD trouble over the past four or five months now. The BSODs typically happen once a week, sometimes twice, with small strings of daily crashes here and there. I'm at my wit's end when it comes to trying to figure out where the problem lies. All of my parts are under warranty, so...
BSOD Help and Support
Multiple BSODs, Random Occurences, Multiple Error Codes
Hey there, So just to start things off, I'm 18 and don't really have much technical knowledge when it comes to computer hardware and errors, etc. I started getting BSODs a while back, but they weren't very frequent, so I uninstalled all the programmes I had on my laptop and it stopped for...
BSOD Help and Support
Multiple BSODs, multiple BCCodes, does not happen in safe mode.
Last couple weeks i've been having a large amount of bluescreens, including but not limited to bccodes 116, d1, 4e, 1a, 50 and 7a. Last night it also froze two or 3 times with no bluescreen. I recently upgraded my Phenom 9550, Biostar A770E and 6GB of DDR2-800 with an i5-2500k, an MSi P67S-C43 and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:12.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App