Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple Different BSODs Custom PC

21 Mar 2014   #1
Svyn

Windows 8.1
 
 
Multiple Different BSODs Custom PC

Technical specs are on my profile for viewing if required.
I bought all the parts to this computer off of newegg.ca back in January 2014, been having multiple BSODs since that time. I've ran Memtest 3 different times overnight and haven't had 1 since issue yet. I've downloaded all the latest drivers off of manufacture websites and by using multiple software's to check for outdated drivers.

Examples of when these BSODs will occur:
Playing Skyrim, I have the game completely pimped out in 2k resolution, very demanding in some areas (Riften). BSOD will occur randomly throughout the game.
While playing Outlast, I've had BSOD's occur when the game tries to do an auto-save in demanding areas.
Witcher II, while playing in highly demanding areas, though BSOD was much less common on that game.
No games open, only Google Chrome on youtube or surfing webpages will also cause BSOD.
(Fixed) Used to have BSOD will computer was fully idle (I was AFK) it would happen approximately 1-2 hours into idle, I fixed that by modifying advanced power settings (HDD idle was at 20 minutes, changed to 60 minutes, no more idle BSODs).

Most common BSODs lately are:
System Service Exception + Variants
IRQL Not Less or Equal
Driver IRQL Not Less or Equal
System Thread Exception Not Handled

I've also tried switching my 2 RAM sticks into the other 2 RAM slots, and switching them a whole different amount of ways, never worked. Everytime these problems arise I always look online for fixes, but they never worked. All drivers are up-to-date (That I know of), I have all the latest Microsoft updates as well.


My System SpecsSystem Spec
.
21 Mar 2014   #2
Svyn

Windows 8.1
 
 

Forgot to put in the dump files.
My System SpecsSystem Spec
21 Mar 2014   #3
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi Svyn.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Also, do you have access to any other GPU to apply and test with? If so, do it and see the situation.

Let us know the results.
____________________________________
Code:
BugCheck 1000007E, {ffffffffc0000005, fffff8800ffbbb80, fffff88003746598, fffff88003745df0}

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::PrepareDmaBuffer+fc8 )

Followup: MachineOwner
-----------------------------------
BugCheck 1000007E, {ffffffffc0000005, fffff80003692ac1, fffff880009a9898, fffff880009a90f0}

Probably caused by : memory_corruption ( nt!MmZeroPageThread+3c4 )

Followup: MachineOwner
-----------------------------------
BugCheck 50, {fffffa8015e00000, 0, fffff80003696bbb, 2}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt!ExAcquireResourceSharedLite+110 )

Followup: MachineOwner
------------------------------------
BugCheck A, {fffffa98005da4d8, 2, 1, fffff800037863bc}

Probably caused by : memory_corruption ( nt!MiRemoveLowestPriorityStandbyPage+1bc )

Followup: MachineOwner
---------
My System SpecsSystem Spec
.

21 Mar 2014   #4
Svyn

Windows 8.1
 
 

After running FurMark for 15 minutes, the GPU only got up to 82 degrees, 99% load, 15% memory load, 69% fan speed.
I've used MemTest multiple times already, all with my RAM in different memory slots, no errors came up.
If you want me to test it again, I can.
My System SpecsSystem Spec
21 Mar 2014   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If you want to do memtest86+ again, do it for at least 8 consecutive passes.

If it does not show any error, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
21 Mar 2014   #6
Svyn

Windows 8.1
 
 

Alright, I ran memtest for 5 passes, no errors.
When I ran driver verifier, it didn't even make it past the windows logo on start-up

It basically flickered to a BSOD and then restart itself, leaving no DMP file.
I did see that it was an IRQL Not Less or Equal error though, didn't see anything else.
I let it BSOD about 5 times before I did a system restore.
My System SpecsSystem Spec
21 Mar 2014   #7
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Quote   Quote: Originally Posted by Svyn View Post
Alright, I ran memtest for 5 passes, no errors.
You require a minimum of 8 passes for MemTest86+ - 5 passes is not enough to thoroughly test RAM
My System SpecsSystem Spec
23 Mar 2014   #8
Svyn

Windows 8.1
 
 

Alright, I've been busy so I left Memtest up for a long time, it ended up having 28 passes and 0 errors.
Driver Verifier gives me the IRQL Not Less Or Equal and doesn't allow me to get passed the windows boot up logo.
My System SpecsSystem Spec
23 Mar 2014   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by Svyn View Post
Alright, I've been busy so I left Memtest up for a long time, it ended up having 28 passes and 0 errors.
That is a relieving news.
Quote   Quote: Originally Posted by Svyn View Post
Driver Verifier gives me the IRQL Not Less Or Equal and doesn't allow me to get passed the windows boot up logo.
Disable driver verifier.

Then free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept then restart.
Now enable driver verifier again. Hopefully this time the computer will crash after booting to windows and we will get the necessary crash dump.
My System SpecsSystem Spec
23 Mar 2014   #10
Svyn

Windows 8.1
 
 

Alright, so I ended up getting to my desktop screen without any BSOD. So I let it run for approximately 24 hours, am I able to do normal tasks on that computer like gaming, streaming, etc.. Or do I just let it sit?
My System SpecsSystem Spec
Reply

 Multiple Different BSODs Custom PC




Thread Tools




Similar help and support threads
Thread Forum
Lenovo T440s, multiple BSODs. Hardware replaced but BSODs continue
Thanks in advance for any advice. The BDODs appear to be of multiple types. Motherboard, RAM, wireless card and SSD were all replaced in early October and system completely reinstalled but BSODs continue. They are more likely to occur 1-2 min after waking from sleep, but recently also occurred...
BSOD Help and Support
Multiple BSODs from multiple apps PAGE_FAULT_IN_NONPAGED_AREA
Hi. Last year, I bought a new PC for graphical software and gaming. From the beggining it had problems (I was recieving BSODs), so, I tested RAMs. It resulted that RAMs we're bad. I returned them in warrantly. (The PC was assembled by the shop, components we're choosen by me so that aren't any...
BSOD Help and Support
Multiple BSODs, Multiple Bugchecks (0xD1, 0x3B, 0x50, 0x0A)
I've been having BSOD trouble over the past four or five months now. The BSODs typically happen once a week, sometimes twice, with small strings of daily crashes here and there. I'm at my wit's end when it comes to trying to figure out where the problem lies. All of my parts are under warranty, so...
BSOD Help and Support
Multiple BSODs, Random Occurences, Multiple Error Codes
Hey there, So just to start things off, I'm 18 and don't really have much technical knowledge when it comes to computer hardware and errors, etc. I started getting BSODs a while back, but they weren't very frequent, so I uninstalled all the programmes I had on my laptop and it stopped for...
BSOD Help and Support
Multiple BSODs, multiple BCCodes, does not happen in safe mode.
Last couple weeks i've been having a large amount of bluescreens, including but not limited to bccodes 116, d1, 4e, 1a, 50 and 7a. Last night it also froze two or 3 times with no bluescreen. I recently upgraded my Phenom 9550, Biostar A770E and 6GB of DDR2-800 with an i5-2500k, an MSi P67S-C43 and...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 10:13.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App