BSOD error 0x0000001e KMODE_EXCEPTION_NOT_HANDLED

72.6C is safe for the CPU but it should never get that high unless you are doing a stress test which puts a heavy load on it.
It looks like you passed it, you didn't run the Intelburnin test. Please run it as suggested following the instructions above.

test passed

Right so I don't think it's hardware related. Can you update your Intel drivers from the link earlier.

Thedoctor44 said:

Hmm, you seem to have a problem with your Intel Processor.

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Probably caused by : intelppm.sys ( intelppm!C1Halt+2 )

Can you run an IntelBurnIn test to see if it is hardware related?

CPU - Stress Test Using IntelBurnTest

so its not the file in c/windows/system32/drivers that has gone wrong ?

Well that is a system shared between intel and micorsoft, it should never be directly altered or changed. Windows couldn't find the 3rd party driver responsible but it knew it was intel driver related so it points to that. That is how I cna explain it in the simplest of forms.

You need to update your intel drivers.

all drivers updated lets see if it happens again i used driver booster to update everything

I wouldn't recommend using a driver update tool like that unless it's from a manufacturer. That can cause more problems.
They can sometimes work but a lot of the time they can cause more harm than good.

well just had onlther bsod so the problem is not fixed lol

Upload the .dmp file.

when i use bluescreenview it always says the same thing
bug check string KMODE-EXCEPTION_NOT_HANDLED
bug check code 0x0000001e
parameter 1,2,3,4 00000000'00000000
caused by driver hal.dll
caused by address hal.dll+5156
crash address ntoskml.exe=75b90