New
#11
when i set up driver verifier and reset the screen goes funny see attached
when i set up driver verifier and reset the screen goes funny see attached
oh and here is the latest dump files of recent bluescreens :)
You have a bugcheck that points to a graphics display crash. Generally these are caused by faulty hardware. Can you please disable driver verifier and run furmark. I know you get a display crash when running verifier but we should make sure it's not hardware first.
Video Card - Stress Test with Furmark
Code:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 3B, {c0000005, fffff8800411bba6, fffff8800848e9a0, 0} Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_LINEAR_POOL::Free+e6 ) Followup: MachineOwner
how long should i run the test for? the card temp leveled out at 103 degrees so got scared and stopped was only like 2 mins didn't crash or see any artifacts
Hello Doctor, I have moved my ram around on the motherboard but still getting BSOD. Here are the latest dump files from the last few days. Thanks for your help on trying to diagnose this error.
The dump files indicate memory corruption which is mainly due to RAM.
RAM however should cause a display crash like in the picture above.
Your GPU is very hot even for a stress test, the max mine gets to is 80*C.
Do you have enough fans in your PC?
Do you have enough airflow?
So do you think I should maybe get some new RAM? Here is the case I have (see attached) and their is a 200mm fan in the top. Could do with a good clean to be honest it's rather dusty. I moved the gpu into the lower pci-e slot but it's right above the psu fan not much space in between them not sure if that could cause issues.
Can you not run Driver Verifier at all?
I can't decide what the resolution could be, it sounds like hardware but the fact that you only get the display crash when driver verifier is enabled makes me believe it's a driver issue.
Last edited by Thedoctor44; 09 Apr 2014 at 10:39.
Well the last two times I enable driver verifier I restarted my PC and after a few minutes the screen goes funny like that picture I uploaded in a previous post. Then I try restarting and get the same issues have just enough time to disable verifier then it's ok again.
Hmm that's a strange one.
Can you try furmark again, I have my doubts about it being only software.