Computer crashed - BC Code 124

Page 4 of 5 FirstFirst ... 2345 LastLast

  1. Posts : 44
    Windows 7 64-Bit
    Thread Starter
       #31

    Thedoctor44 said:
    I would recommend running it overnight, memtest86 will never stop running unless your computer shuts down or you stop it.
    An error will show up red at the bottom, you can't miss it.
    I thought you had to stop it once an error occurred... So it's okay to have it continue running even though an error has occurred?
      My Computer

  2.    #32

    No not at all, I've never known that anyway.
    It's fine to run it overnight.
      My Computer


  3. Posts : 44
    Windows 7 64-Bit
    Thread Starter
       #33

    Thedoctor44 said:
    No not at all, I've never known that anyway.
    It's fine to run it overnight.
    Sweet, I'll run it tonight just before I go to bed!
      My Computer


  4. Posts : 44
    Windows 7 64-Bit
    Thread Starter
       #34

    Also, did the files that I uploaded the second time round have anything about the CPU like the first zip did? I just wanted to know if the two errors were caused by the same thing...

    Thanks for the replies. :)
      My Computer

  5.    #35

    There were no new dump files unfortunately.
    Last edited by Thedoctor44; 26 Apr 2014 at 08:09.
      My Computer


  6. Posts : 44
    Windows 7 64-Bit
    Thread Starter
       #36

    Thedoctor44 said:
    There were no new dump files unfortunately.
    Ohh so it was found in the dump file. Alright, thanks!
      My Computer


  7. Posts : 44
    Windows 7 64-Bit
    Thread Starter
       #37

    Thedoctor44 said:
    I would recommend running it overnight, memtest86 will never stop running unless your computer shuts down or you stop it.
    An error will show up red at the bottom, you can't miss it.
    Ran it overnight and no errors came up, everything seemed fine! Ended up with 6 passes and nearly up to the 7th.
      My Computer

  8.    #38

    Did you run Prime95 again for around 2 hours?
    If not please run it, if so and no errors came up then I recommend running Driver Verifier by following these instructions

    Driver Verifier - Enable and Disable

    Reason being, I have had encounters where 0x124 bugchecks can actually be caused by software.

    Please create a system restore point before enabling Driver Verifier as it can make your system unbootable, even in safe mode

    System Restore Point - Create
      My Computer


  9. Posts : 44
    Windows 7 64-Bit
    Thread Starter
       #39

    Thedoctor44 said:
    Did you run Prime95 again for around 2 hours?
    If not please run it, if so and no errors came up then I recommend running Driver Verifier by following these instructions

    Driver Verifier - Enable and Disable

    Reason being, I have had encounters where 0x124 bugchecks can actually be caused by software.

    Please create a system restore point before enabling Driver Verifier as it can make your system unbootable, even in safe mode

    System Restore Point - Create
    Alright!

    What do you mean by unbootable...
      My Computer

  10.    #40

    As in windows will not start without getting a blue screen.
    If that happens you can revert to the restore point you created earlier.
      My Computer


 
Page 4 of 5 FirstFirst ... 2345 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:37.
Find Us