Random BSOD With Little Information That Won't Go Away


  1. Posts : 2
    Windows 7 64 bit
       #1

    Random BSOD With Little Information That Won't Go Away


    Hello All,

    This is my first post and I apologize that it is asking for something. However, I found this wonderful site through searching through the internet looking for my solution. I recently got a brand new machine (hp z30 workstation with an i7) and out of the box it seems to have bsod issues. I updated all of the windows updates possible and the rate of bsods increased. I then formatted hard drive and reinstalled windows 7 64bit and in about 2 weeks I have had 2 bsods. I am uploading the minidump folder in hopes that someone could point me in the direction to a fix. I am more concerned about the IRQL_NOT_LESS_OR_EQUAL as that is the one I most frequently get.

    Also I've ran malware (mabs) and virus scans after the cannot write to read only memory bsod.

    Thank You In Advance
    Last edited by dchosen; 14 Apr 2014 at 09:06. Reason: uploading sf diagnostic results
      My Computer


  2. Posts : 15,026
    Windows 10 Home 64Bit
       #2

    Norton contributes to BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

    Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

    Microsoft Security Essentials - Free Antivirus for Windows

    Malwarebytes - Free

    Good and Free system security combination.

    Reduce items at start-up: Startup Programs - Change

    Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

    Run a System file check (SFC): SFC /SCANNOW Command - System File Checker

    Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

    adfs.SYS Fri Jun 27 02:52:37 2008 (48640195)
    Adobe File System Driver
    Driver Reference Table - adfs.SYS

    Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

    Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper
    Check for heating issues using Speccy or HWmonitor

    Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

    If this does not provide stability. Test RAM.

    Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.


    The goal is to test all the RAM sticks and all the motherboard slots.

    Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

    If you get errors, stop the test and continue with the next step.

    1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
    *Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
    If this stick passes the test then go to step #3.

    2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
    *If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
    *If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
    3. Test the next stick of RAM (stick #2) in the next motherboard slot.
    *If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
    *If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
    4. If you find a stick that passes the test, test it in all the other motherboard slots.

    If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

    In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
       Information
    Errors are sometimes found after 8 passes.

       Tip
    Do this test overnight, before going to bed.


    BSOD DUMP OUTPUT
    Code:
    Debug session time: Mon Apr 14 07:09:05.397 2014 (UTC + 6:00)
    Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
    System Uptime: 4 days 23:51:58.753
    Probably caused by : memory_corruption
    BugCheck A, {c0, 2, 1, fffff80003087a84}
    BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
    Bugcheck code 0000000A
    Arguments: 
    Arg1: 00000000000000c0, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000001, bitfield :
    	bit 0 : value 0 = read operation, 1 = write operation
    	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
    Arg4: fffff80003087a84, address which referenced memory
    BUGCHECK_STR:  0xA
    DEFAULT_BUCKET_ID:  CODE_CORRUPTION
    PROCESS_NAME:  System
    FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT
    MaxSpeed:     3400
    CurrentSpeed: 3392
    BiosVersion = L51 v01.13
    BiosReleaseDate = 10/18/2013
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Z230 Tower Workstation
    จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
    Debug session time: Wed Apr  9 07:16:08.646 2014 (UTC + 6:00)
    Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
    System Uptime: 1 days 11:50:06.260
    Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
    BugCheck BE, {fffff88001f2acc0, 4753121, fffff88004455b10, a}
    BugCheck Info: ATTEMPTED_WRITE_TO_READONLY_MEMORY (be)
    Bugcheck code 000000bE
    Arguments: 
    Arg1: fffff88001f2acc0, Virtual address for the attempted write.
    Arg2: 0000000004753121, PTE contents.
    Arg3: fffff88004455b10, (reserved)
    Arg4: 000000000000000a, (reserved)
    BUGCHECK_STR:  0xBE
    DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
    PROCESS_NAME:  System
    MaxSpeed:     3400
    CurrentSpeed: 3392
    BiosVersion = L51 v01.13
    BiosReleaseDate = 10/18/2013
    SystemManufacturer = Hewlett-Packard
    SystemProductName = HP Z230 Tower Workstation
    จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

ฉ Designer Media Ltd
All times are GMT -5. The time now is 21:17.
Find Us