Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Cold Boot

16 Jun 2014   #11

Windows 7 Home Premium x64

I guess the files did not attach?

My System SpecsSystem Spec
16 Jun 2014   #12


No, you need to select drivers manually from a list, then choose all 3rd party drivers, none from the following.

Unknown, Microsoft Cooperation, Macrovision and Microvision.

1: kd> dt nt!_mmpfn fffffa80014d9180
   +0x000 u1               : <unnamed-tag>
   +0x008 u2               : <unnamed-tag>
   +0x010 PteAddress       : 0xfffff6fb`400010d8 _MMPTE
   +0x010 VolatilePteAddress : 0xfffff6fb`400010d8 Void
   +0x010 Lock             : 0n1073746136
   +0x010 PteLong          : 0xfffff6fb`400010d8
   +0x018 u3               : <unnamed-tag>
   +0x01c UsedPageTableEntries : 0xffff
   +0x01e VaType           : 0 ''
   +0x01f ViewCount        : 0 ''
   +0x020 OriginalPte      : _MMPTE
   +0x020 AweReferenceCount : 0n128
   +0x028 u4               : <unnamed-tag>
Still looks driver related to me, I suggest enabling driver verifier by using my instructions at the start then following the rest from the link.
My System SpecsSystem Spec
18 Jun 2014   #13

Windows 7 Home Premium x64


I reset Driver Verifier last night, it has been 24 hours and no crash. There have been two events that may have a bearing on my issue. Monday evening my system froze while on the net. I waited and the mouse started to respond to cursor movement but would not close/change any program.

I reset then shutdown. Windows & has never seemed to like my keyboard/mouse; Microsoft Intellitype/Intellipoint (has the USB orb looking receiver). Both are several years old.

I had a new extra receiver; I installed it. When I booted and was in Windows it went through a whole new device install along withy some other extra features I did not install. I have the current Intellitype/Intellipoint driver/software installed.

I checked Windows Update after the system was running. There was a new update I had not seen before; KB911895, I installed. Up to now there have been no crashes.

I'm not believing this yet, I will wait another few days before committing.

Another observation; when selecting drivers in Driver Verifier I noticed Brother Industries Ltd. I do not have a Brother device; my printer/scanner/fax is Canon (no Canon drivers present). Is Canon/Brother same entity?

My System SpecsSystem Spec

25 Jun 2014   #14

Windows 7 Home Premium x64
Took awhile


Sorry it took this long. I enabled Verifier again Sunday the 15th, after three days I did not have a crash so I disabled Verifier. Friday the 2oth I had a crash with Verifier disabled, I enabled Verifier.

Last night while I was away from the computer I returned with the Windows Recovered message, dump attached. I hope the information you are looking for is present.

My System SpecsSystem Spec
29 Jun 2014   #15

Windows 7 Home Premium x64


Not sure if you found an issue or had time to analyze the last dump file. If it matters I have a few more crashes.

All were while Internet Explorer was open and all displayed "Internet Explorer Has Stopped Working". When trying to close IE the system will BSOD.

Typically the system will only crash once per day and not every day; will not crash again the same day 95% of the time.


My System SpecsSystem Spec

 BSOD Cold Boot

Thread Tools

Similar help and support threads
Thread Forum
Random Freezing/BSOD, Boot Disk Failure, OK Cold Boot then Repeat
Yesterday Windows Explorer began to stop responding fairly frequently, but would restart itself without issue and continue to run fine. Today, Windows now freezes completely every 45ish minutes - usually a random program stops responding followed by everything, the mouse gets stuck,...
BSOD Help and Support
Cold Boot BSOD....I believe...
I've been getting a weird BSOD everytime I cold boot in the morning. However, unlike the other cold boot BSOD's I've read about on the site, my comp doesn't blue screen until after i've passed the loading screen, and I log into my desktop. It's really weird, but I always have enough time to log...
BSOD Help and Support
BSOD KSOD No Boot Win7 64bit Cold Boot
I'm at my wits end... The problem: First installed Windows 7 Proff 64-bit on this machine last monday after installing updates / drivers etc I began to recieve intermitent BSODs then began the trouble shooting. Tested memory with memtest86+ passed manually set voltages / timings ran...
BSOD Help and Support
Cold Boot BSOD
BSOD on startup after 8 hours or so of being off overnight. Occurs everyday. Ran memtest+86 & passed 7 loops.. I remove a ram stick & replace it for the BSODs to go away and windows to startup, continues to run fine all day. Ran through windbg but I don't really know what I'm looking at. ...
BSOD Help and Support
BSOD on cold boot
Hi, every time I do a cold boot, my computer crashes with bluescreen at exactly the same time, the Win7 loading screen. After this, I turn the computer off, than i turn off the power supply and a few seconds later, I turn it on again. If I now start the computer, it will boot without any...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:05.
Twitter Facebook Google+