Random BSOD's - USB_DRIVER_BUGCODE and SYSTEM_SERVICE_EXCEPTION

Hi Roy Renard.

Download and install Intel® Graphics Drivers for Intel® Core™, Pentium® and Celeron® Processors.

Upload the list of all the third party drivers Using NirSoft DriverView :

• Download and execute Driverview
• View > Hide Microsoft Drivers
• Edit > Select all
• File > Save Selected Items
• In the Save dialog, Set the path to desktop, Put "Driverview" in the name field, and save.
• Zip the .txt file and upload it.

Not finding any fair reason for a Bugcode USB Driver.

Uninstall Intel(R) Turbo Boost.

And disable bluetooth, it is is not very necessary.

Then observe the situation. Let us know how it is working after doing those. If it BSODs again, report us with the data.

Code:

BugCheck 1000007E, {ffffffffc0000005, fffff8000336b078, fffff880031a19a8, fffff880031a1200}

Probably caused by : ntkrnlmp.exe ( nt!CmpRemoveKeyHash+4c )

Followup: MachineOwner
---------

STOP 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Usual causes: Insufficient disk space, Device driver, Video card, BIOS, Breakpoint with no debugger attached, Hardware incompatibility, Faulty system service, Memory, 3rd party remote control

Let us test for the items other than the striked out ones.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Search for anu possible BIOS update from HP.

Remove any USB device that is attached with the computer.

Make it sure that windows is properly up-to-date.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If memtest86+ does not show any error. enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

Sorry for the extremely late response, but it's been somewhat difficult for me to successfully perform the different procedures. My computer has been crashing about 10-20 times daily now and my cooling base broke, so I've been unable to do the Memtest86+ step, since my computer overheats fairly easily without a cooling base. I saved up for a new one and am about to buy it as soon as possible, so I hope this thread doesn't get closed because of inactivity.
I'll try to post the info you required as soon as possible, as well.
Thanks for understanding!

Edit: I updated the BIOS from F.16 to F.32, which is, according to the HP site, the latest BIOS version available for my model.
I also tried out the Graphics Card stress test with Furmark, but the computer crashed/froze in the middle of the test.
Everything seems to provoke a crash right now and my computer looks like it's starting to have problems turning on after a crash occurs, since it repeatedly turns on and off (for about 5-10 times) until it finally starts up.

Change the cooler first, and then go for any stress test. Otherwise it may go fatal.