BSOD's & black screens - costum build pc

With that in mind I recommend trying Furmark.


Stress test your graphics card with Furmark

I recommend running it for around 30 minutes

   Warning

Furmark will increase the temperature of your GPU rapidly so keep and eye on your temperatures

Are you running specific programs when it crashes?

Thedoctor44 said:

With that in mind I recommend trying Furmark.


Stress test your graphics card with Furmark

I recommend running it for around 30 minutes

   Warning

Furmark will increase the temperature of your GPU rapidly so keep and eye on your temperatures

Are you running specific programs when it crashes?

Not afaik.
The pc is beeing used for internet purpose and music.
So it runs Itunes, chrome, firefox ,spotify,skype...
It also uses an on board graphics chipset (again if it's relevant).

Can I also use aida64 to stress my GPU or does Furmark does a better job?

I recommend you use Furmark.

Well this is embarrassing..., but is it possible BSOD's are caused by a badly plugged 24pins connector?
(this may have caused the black screens I think..)

Yes bad connections can cause lots of different errors.
You may have found the solution.
Let us know how it goes :)

Thedoctor44 said:

Yes bad connections can cause lots of different errors.
You may have found the solution.
Let us know how it goes :)

It would be pretty embarrassing if this was the problem..
I'll let you know how it goes and mark is as resolved if this was it.

No not really, we all make mistakes.

Well, it still crashes..
Shall I upload the new dumpfiles?
Also I did ran a Furmark test the day I found out about the badly placed 24pin connector which ran fine. (no crashes)
This pc is so screwed x)

Yes upload the dump files.
Don't say that, we will find the cause in due time

My apology it took so long for uploading the dump files but here they are.