Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: looping thu boot no start menu

04 May 2014   #1
Rob D

Windows 7 Ultimate x64
looping thu boot no start menu

hello I'm hoping someone here can help I have this looping at start boot say it's loading window then reboots I was able to get the error codes here's what happen I was in services in the control panel was checking every thing then went to ms-config and accidentally disabled all and rebooted as i rebooted i realize i just goofed (OUCH!!!!) now i have this looping at start up I tried to do the looping steps posted no go here I tried to restore system threw safe-mode no go again I tried to fix the bcd file that Didn't take either ( GO FIGURE) said corrupt reg on problem event 7 he's my error codes.... ***Stop: 0x00000074,(0x0000000000002,0xFFFF8800379E0,0x0000000000000002, 0xFFFFFFFFc000009A) I don't have a rpair disc or the win7disc anymore got lost in the moving while back I would really appreciate a solution here as all my Graphics are on this pc for college thanks in advance RobD

My System SpecsSystem Spec
05 May 2014   #2

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Hi Rob.

Look at this tutorial: Clean Reinstall - Factory OEM Windows 7

Point 1 provides a download link. Get the version appropriate for you. Then do two jobs with it:
A stop 0x74 may be caused by bad memory too. So better you test your RAM modules for possible errors too.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
My System SpecsSystem Spec

 looping thu boot no start menu

Thread Tools

Similar help and support threads
Thread Forum
Set up a dual boot menu on start?
I have a system Win 7 Home. Needed to upgrade ram so had to install Ultimate. But put that on separate SSD drive leaving original 7 Home intact just in case. System always boots to 7 Home. Cannot seem to make any BIOS setting work. The options in setup boot menu don't allow me to move either...
Installation & Setup
Lenovo L520 looping at start
I have upgraded my to Windows 7 ultimate all seemed to load ok. However when you turn the laptop on you just get Lenovo page saying press enter to enter bios and this keeps repeating its self I am sure there is an easy cure. Thank You
Installation & Setup
Windows is boot looping.
I'm not really sure what this is, but I'll try to provide as much detail as possible. About two years ago or so I set up a dual boot (Ubuntu and Windows) just for fun. I enjoyed messing around with Ubuntu because I thought it was fresh and new to me. That doesn't have anything to do with the...
General Discussion
Windows keeps looping on start up. AAAHHHH! Help! I'm getting DIZZY!
I'm getting really dizzy watching this thing going in circles!!:sick: I am trying to repair a friend's Gateway NE56R (Acer) laptop. It has Windows 7 Prem loaded on it. I have the set of 4 Recovery discs, 1 System Disc and 1 Language Disc, they are all Factory Discs, not self made recovery ...
Installation & Setup
What key or keys do I use to get to the boot menu on start up
What key or keys do I use to access the boot menu on a Acer AX1430g desk top Im trying to recover my password by using CD-ROM with the NT recovery
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:19.
Twitter Facebook Google+