Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD WDF01000.sys

13 May 2014   #1

Windows 7 Pro 64-bit
BSOD WDF01000.sys

I have attached a zip of my minidump folder. Getting random BSOD's. Appears to happen when PC is sitting idle for the most part. Started shortly after Win 7 Pro 64-bit install. This is from an HP 6560b laptop.

It seemed that windbg only shows wdf01000.sys as the problem, but I'm not sure if my symbols are correct or if debugging correctly. I can't seem to find what might actually be causing the wdf01000.sys or what I should reinstall to fix the problem.

I've ran several hardware diagnostics and it doesn't seem to find anything wrong with either the hard drive or RAM chips. There are 2 4GB chips.

Please let me know if more info is needed and thanks for the help!!!!!!

My System SpecsSystem Spec
13 May 2014   #2

Microsoft Community Contributor Award Recipient

Win 10 Pro x64

Hi there,

Your intel gigabit network driver is being flagged,

Unable to load image \SystemRoot\system32\DRIVERS\e1c62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for e1c62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
Driver Reference Table - e1c62x64.sys

start             end                 module name
fffff880`03000000 fffff880`03056000   e1c62x64 T (no symbols)           
    Loaded symbol image file: e1c62x64.sys
    Image path: \SystemRoot\system32\DRIVERS\e1c62x64.sys
    Image name: e1c62x64.sys
    Timestamp:       Wed May 04 17:19:01 2011 (4DC1ECF5)
    CheckSum:         00056BAB
    ImageSize:        00056000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
It's from 2011, try updating that driver.

This is the preferred method for uploading info about crashes,

Blue Screen of Death (BSOD) Posting Instructions

If you keep having problems after updating that driver, use the tool provided to upload all the info.
My System SpecsSystem Spec
13 May 2014   #3

Windows 7 Pro 64-bit

Thanks a ton!! I will try to update that. Can I ask how you found that from the minidump? I am using winDbg and all it would show me is wdf01000.sys. How did you find the e1c62x64.sys? Do you think it might just be my symbols or something, or do you debug these a different way?
My System SpecsSystem Spec

13 May 2014   #4

Microsoft Community Contributor Award Recipient

Win 10 Pro x64

You're welcome, try using this method to find that driver,

!thread > enter

Then find the "base" & "limit" numbers,

dps limit base > enter

(Ctrl+C to copy & Ctrl+V to paste)

Then just scroll till you see that output I showed you.

Quote   Quote: Originally Posted by koolkat77 View Post
I had mentioned that ---
Quote   Quote: Originally Posted by koolkat77 View Post
Sometimes analyzing the BSOD deeper gives you idea where its driver's failing
The common commands for checking drivers are lmtsm and lm, I use both of these often :)

How to check which driver is failing between crashes?:

It's the !thread command that you need to run.
1. Hit enter and you will then see a few numbers like this:
2. Copy and paste the numbers from “Limit and Base” but before that type “dps”
And hit enter.

3. It will be busy but expand after a while. Then scroll down slowly and see which driver is failing there..
For instance, in the image above you can see nvlddmkm.sys failing.
My System SpecsSystem Spec

 BSOD WDF01000.sys

Thread Tools

Similar help and support threads
Thread Forum
BSOD with wdf01000.sys driver
I'm getting random crashes on my laptop Toshiba Portege R830 3G. I'm sure it's a driver issue but can't find which one. wdf01000.sys is the error I'm getting now. I used to get KeyAgent.sys and another one phx....?? which I've since removed.
BSOD Help and Support
BSOD with Wdf01000.sys at every boot
Hello, i used on my comp Advanced system care (i'm trying to install almost none unneccessary programs on my workcomp, but my mom used ASC and it worked fine with her so i stupidly thought it will be ok with me too :) ). What it done was, that it updated drivers. That was my intention anyway,...
BSOD Help and Support
BSOD Wdf01000.sys
Hello, just got a bluescreen and i couldnt get back into windows untill i removed one of my RAM`s. I tryed the startup repair system restore before doing that but i was getting bluescreen everytime before or after windows was loading. Tho i only see only one event, the others might have been lost...
BSOD Help and Support
BSOD, Driver Wdf01000.sys
Trying to help my father-in-law who is getting a BSOD on his very new laptop. We've barely used the thing, so I'm not getting it. Attached is the SF dump file info. I am intermediate level computer knowledge, so bear with me. It starts in safe mode. Thanks for any help.
BSOD Help and Support
BSOD wdf01000.sys happens 2 - 3 times a day
Any help on this would be much appreciated. Thanks in advance. Is Windows 7 -X86 -Original OS -OEM - hardware about 1 year old
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 12:47.
Twitter Facebook Google+