Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Seemingly random BSOD

27 May 2014   #31
Thedoctor44

 

Restoring will bring your system back to how it was when the restore point was made.
So you will not have to uninstall anything.


My System SpecsSystem Spec
.
28 May 2014   #32
SypherLocke

Windows 7 Professional 64 Bit
 
 

Odd I thought I made this post before I left earlier.

Anyway I updated a program called, Networx NetWorx : bandwidth monitor, connection speed test & traffic usage log this was after I had disabled verifier after letting it continue to run all night, I wanted to play some of my newer games with it running, some of the games crashed but I am going to think that has more to do with my old driver than anything.

So after I turn off verifier this morning I create a restore point and install the update to networx and immediately within about 20 minutes the pc bsod. I could have sworn I made this post then but apparently not, after getting back from running errands I find that the comp is once again bsod.

See attached files.

Do you want me to turn verifier back on?
My System SpecsSystem Spec
28 May 2014   #33
SypherLocke

Windows 7 Professional 64 Bit
 
 

Ok after another crash and a freeze I turned on Verifier. I'm tempted to just restore everyting to the earlier time.
My System SpecsSystem Spec
.

28 May 2014   #34
Thedoctor44

 

Yes, a driver is trying to access pageable memory at an IRQL that is at dispatch level or above, this is not allowed so the system bugchecks.

Enable Driver Verifier again.
My System SpecsSystem Spec
28 May 2014   #35
SypherLocke

Windows 7 Professional 64 Bit
 
 

Quote   Quote: Originally Posted by Thedoctor44 View Post
Yes, a driver is trying to access pageable memory at an IRQL that is at dispatch level or above, this is not allowed so the system bugchecks.

Enable Driver Verifier again.
Been running for 2 and a half hours no problem yet.
My System SpecsSystem Spec
28 May 2014   #36
Thedoctor44

 

Keep it running for around 24 hours.
My System SpecsSystem Spec
29 May 2014   #37
SypherLocke

Windows 7 Professional 64 Bit
 
 

No BSOD but there was a freeze with graphical distortion.

And I'm actually able to run watch dogs on my system with the very old driver, I just had to replace a dll in the watch dogs directory.

Will continue to run verifier until the 24 hours are up or a bsod.

EDIT: Does it do any good to upload my logs on a freeze if there is no bsod? I don't want to waste your time by giving you information that you don't need.
My System SpecsSystem Spec
29 May 2014   #38
Thedoctor44

 

No the dump files are of no use if there are no new ones.
I'll ignore the freeze for the time being and see if DV picks anything up.
My System SpecsSystem Spec
29 May 2014   #39
SypherLocke

Windows 7 Professional 64 Bit
 
 

Day has come and gone, no BSOD one freeze. Even played Watch Dogs for a few hours. Turned off DV.

EDIT: After I wrote this, I, for reasons that confuse even me decided to go to the folder where Networx resides and roll it back to before I updated it, then went back to playing watchdogs, 10 minutes in and bsod, i turn on verifier and it wouldn't even let me load all my startup programs before freezing. So I load into safe mode, turn off verifier, and uninstall Networx, it fulfilled it's use long ago.
My System SpecsSystem Spec
29 May 2014   #40
SypherLocke

Windows 7 Professional 64 Bit
 
 

On a hunch I turned DV back on and rebooted, still wouldn't allow me to complete my startup. I should note that the freeze I'm talking about is the graphic distortion and freeze.

So i've turned dv back off, if needed I can restore my system to the point I created yesterday.
My System SpecsSystem Spec
Reply

 Seemingly random BSOD




Thread Tools




Similar help and support threads
Thread Forum
BSOD Seemingly random
I've attached the logs Thanks for any help
BSOD Help and Support
Seemingly Random BSOD
Hello, For quite some time now I have had to put up with numerous and often random BSOD errors. I have done memory and hard drive checks with multiple passes and all appear to be okay. I have ensured all data cables are connected properly and nothing is loose, again all seems to be...
BSOD Help and Support
BSOD at seemingly random times, memory dump blaming random drivers
I've been plagued by odd problems since making this custom build about a month ago, but the latest is the increasing frequency of BSODs. They never occur at load (gaming with high end specs), but often occur at shutdown (forcing a restart before I can then actually shut down). I normally boot into...
BSOD Help and Support
BSOD - seemingly random
I have been bluescreening 1-2 times a day over the passed couple days, and there's no particular thing I can do that seems to make it happen. I have attached all the necessary files. Also, here are some specs: Windows 7 Ultimate x64 Full retail version All hardware is just over a year old,...
BSOD Help and Support
Seemingly random BSOD
I keep my system running 24/7 in a room with little dust and average temperatures of about 60F. I use it for general forum surfing, high end gaming, and for CAD software. I don't seem to have any other problems but every few days, whether the system is idle or I am running the processor at 100%,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:52.
Twitter Facebook Google+