bsod when i start my pc


  1. Posts : 2
    windows 7 ultimate 32
       #1

    bsod when i start my pc


    when i start my pc (sometimes)bsod of appears say atimpag problem...here is dump files and hope u find a solution thnx
      My Computer

  2.    #2

    Code:
    BugCheck 116, {858a2510, 93b6d7f2, c0000001, 3}
    
    Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for atikmpag.sys
    *** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
    Probably caused by : atikmpag.sys ( atikmpag+77f2 )
    0x116 bugchecks indicate an attempt to reset the display within the allocated time interval failed which resulted in a bugcheck.

    Lets take a look at the error I highlight in orange.

    Code:
    0: kd> !error c0000001
    Error code: (NTSTATUS) 0xc0000001 (3221225473) - {Operation Failed}  The requested operation was unsuccessful.
    As it says the previous operation failed but it doesn't say why which isn't helpful.

    Code:
    0: kd> u 93b6d7f2
    atikmpag+0x77f2:
    93b6d7f2 8bff            mov     edi,edi
    93b6d7f4 55              push    ebp
    93b6d7f5 8bec            mov     ebp,esp
    93b6d7f7 56              push    esi
    93b6d7f8 57              push    edi
    93b6d7f9 8b7d08          mov     edi,dword ptr [ebp+8]
    93b6d7fc be010000c0      mov     esi,0C0000001h
    93b6d801 85ff            test    edi,edi
    I'm seeing a lot of push instructions which is used to add data onto the stack.
    The faulting instruction pointer tried to move data onto the zeroed stack which isn't allowed, now it might be zeroed because it's a minidump as it doesn't save all registers.

    At this point I'm thinking more of a driver problem rather than a graphics card failure.

    Code:
    0: kd> lmvm atikmdag
    start    end        module name
    9480b000 951f6000   atikmdag   (deferred)             
        Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
        Image name: atikmdag.sys
        Timestamp:        Tue Apr 30 03:02:54 2013 (517F264E)
        CheckSum:         009A2A46
        ImageSize:        009EB000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Lets try an update, I suggest one around December as the latest drivers have caused quite a few issues.

    Download Drivers

    One last suggestion would be to remove avast using the removal tool then replace it with MSE and Malwarebytes.

       Tip

    Make sure you don't enable the free trial of malwarebytes pro, deselect the option when prompted.





    Looking at your msinfo file I see this installed...

    Code:
    DAEMON Tools Pro Agent	"c:\program files\daemon tools pro\dtagent.exe" -autorun	geo-PC\geo	HKU\S-1-5-21-2682449194-873571423-3709750171-1000\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
    Daemon Tools/Alcohol is known cause of BSODs.

    Registry and SPTD problems | DAEMON Pro Help
    How to remove sptd.sys from system

    1. Uninstall Daemon Tools.
    2. Download the SPTD standalone installer and follow these steps:
    3. Double click the executable to open it
    4. Click the button shown below



    If the button it is grayed out, as shown in the image, there is no more SPTD installation on your system, and you can just close the window.
      My Computer


  3. Posts : 2
    windows 7 ultimate 32
    Thread Starter
       #3

    thnk u doctor gonna check all the solution u give in this week
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 13:43.
Find Us