Unknown BSOD issue with Intel Nuc computer

  1. Posts : 6
    Windows 7 Ultimate x64 SP1

    Unknown BSOD issue with Intel Nuc computer


    I am having frequent BSOD issues with my Intel Nuc. What started out as a once in a while thing is now a common problem. I suspect it may be the memory (2x2GB), but am not sure. If anyone is able to take a look at my logs and help identify the problem/offer a solution, I would really appreciate it.


      My Computer

  2. Arc
    Posts : 35,373
    Microsoft Windows 10 Pro Insider Preview 64-bit

    Hi hbcobra.

    I dont have a fair concept about the hardware of th NUC type computers, but I may try to assist you to find a way out.

    First, update the BUFFALO WLI-UC-GNM driver from Downloads ... it seems to be old, of 2010; and having some issues.
    BugCheck 19, {3, fffffa8008bf6b00, fffff80003014bf0, 6c734d46020c0015}
    *** WARNING: Unable to verify timestamp for ucgnmx.sys
    *** ERROR: Module load completed but symbols could not be loaded for ucgnmx.sys
    Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+cbb )
    Followup: Pool_corruption
        Image name: ucgnmx.sys
        Timestamp:        Thu Jul 08 07:39:05 2010 (4C353341)
    The Bugcheck codes are 0x3B, 0xA and 0x50 mostly, so testing the RAM sticks is a good idea, specially when you are having a feeling.
    Test your RAM modules for possible errors.
    How to Test and Diagnose RAM Issues with Memtest86+
    Run memtest for at least 8 passes, preferably overnight.

    If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

    Let us know the results.
      My Computer


  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 01:43.
Find Us