Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c

17 Jun 2014   #1
dutchinvegas

Windows 7 Home Premium x64
 
 
BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c

Hi,
This problem started in Flight Simulator, but now its random. I have run memtest twice for four hours each, all is fine. I have a Western Digital HD, and ran their diagnostic tool for it from their site. I have reset the RAM after cleaning it also. I dust out the machine regularly. I checked the voltage in the BIOS and the +3.3, +5, and +12 all fall in range. BUT, I also have CPUID HWMonitor, and that shows different voltage readings, way below what they should be (ex. +12V - 8.016V) WAY off! I don't know if that is correct or the reading in the BIOS itself. The last reboot was when I was in Flight Simulator. I ran it in window mode, with GPUID running so I could monitor the temperature. When it rebooted, the last temp I saw was 55C, which is hardly overheating I believe. All of the last 10 or so reboots show "caused by address : ntoskrnl.exe+4adb3c."

I'm leaning towards the power supply, but the different readings are confusing.

Thanks in advance,

Dutch


My System SpecsSystem Spec
.
17 Jun 2014   #2
dutchinvegas

Windows 7 Home Premium x64
 
 
Log files

Sorry, forgot to attach the dm log collector info. Here it is.
My System SpecsSystem Spec
Reply

 BSOD random, error 0x00000124, caused by address ntoskrnl.exe+4adb3c




Thread Tools




Similar help and support threads
Thread Forum
BSOD Randomly, Error - 0x00000124 - Caused By Address : hal.dll+12a3b
Hi There, I am extremely confused by these BSODS I have been getting for the last few weeks. No new drivers were installed, no new software was installed, and I haven't changed setting in the days before I started receiving the BSOD. My computer has crashed about 5 times in the past 2 weeks. I...
BSOD Help and Support
BSOD on wake-up error 0x00000124, driver hal.dll, address ntoskrnl.exe
Generous experts, I am getting somewhat random, though more often on "wake-up" BSOD. It seems that it may be related to the cpu, as the event view states: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Cache...
BSOD Help and Support
Random BSODs, error 0x00000124, caused by ntoskrnl.exe
Randomly happens, sometimes in a game, sometimes when browsing, sometimes when RDP'ed in, sometimes when unattended. No repro steps yet, just be patient and it will happen. Sometimes when it blue screens, it takes the whole network down spamming the switches and router with packets.
BSOD Help and Support
BSOD , error 0x1000007e, caused by Wdf01000.sys, address ntoskrnl.exe
For the past 3 weeks, I have been receiving blue screens serval times. :sarc: Each time, the caused of the error reports has been "Wdf01000.sys" and address at ntoskrnl.exe+74a90. I've attached 3 dmp files to this post. Any help is appreciated! Thanks.
BSOD Help and Support
BSOD random error 0x00000124, hal.dll at address ntoskrnl.exe+7cc40
I keep getting a random BSOD, I get it a lot in Lightroom 3 but have gotten the same error doing nothing. *** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80053d5028, 0x00000000b2000040, 0x0000000000000800) *** hal.dll - Address 0xfffff80002c15a3b base at 0xfffff80002c03000 DateStamp ...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:53.
Twitter Facebook Google+