Crash, No BSOD every couple days, 1000009f

SugarSync is causing some issues here.

Code:

fffff880`03184c70  fffff880`0752a12cUnable to load image \SystemRoot\system32\DRIVERS\sscbfs3.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sscbfs3.sys
*** ERROR: Module load completed but symbols could not be loaded for sscbfs3.sys
 sscbfs3+0x1f12c
fffff880`03184c78  fffff880`0752a12c sscbfs3+0x1f12c

Better you dont allow it to be auto started. Call it on necessity. Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.

1. Click on the Start button
2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
3. Select the “Startup” tab.
4. Deselect all items other than the antivirus.
5. Apply > OK
6. Accept then restart.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :

• Double click to open it.
• Click this button only:
• 
• If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.

Now .....

cooter said:

I am thinking it is either the SATA controller on the motherboard or a compatibility issue between that and the SSD.

There is a fair chance. But first of all make it sure that the firmware to the SSD is up to date.
How to Upgrade Intel SSD Firmware | StorageReview.com - Storage Reviews

Post a screenshot of the SSD and th HDD using CrystalDiskInfo - Software - Crystal Dew World

And follow Power Plan Settings - Change .... set the SSD settings as this picture ....

Attachment 322759

Then observe how it goes. Let us know accordingly.

• I set the SSD so it does not go to sleep.
• The SSD already had the latest firmware and I have the most recent version of Intel SSD Toolbox.
• I uninstalled daemon-tools, however when I install it I don't think I install the SPTD portion.
• I disabled the Sugarsync startup, however I did it through the program preferences instead. This also seemed to remove it from the msconfig list.
• I have attached the requested screenshots for both hard drives.
• I have also been watching the computer with process explorer and today I noticed that Interrupts are using about 25% of the CPU right now. I will try to see what is causing that. Let me know if you have advice on how to figure that out.

Nice. :)

Let us know if the BSODs recur.