BSOD during random times, unsure as to why


  1. iTyphlosion
    Posts : 16
    Windows 7 x64
       New #1

    BSOD during random times, unsure as to why


    Today I got a new monitor, an LG 24MP56HQ-P. I plugged it in and made it my primary monitor (moving my original monitor, an LG Flatron W2361VG to the side as a secondary), and because I do not have a CD drive working (not enough SATA Power Cables to power it up, used my last one for my second HDD), I could not install the drivers for the monitor using the CD, instead I downloaded and installed, then restarted the PC; and since I have done this my screen has gone black twice with red horizontal lines (Only on the new monitor, the second would just go black) the first time, while the second time it happened I got BSOD. Now fast forward an hour or two, I'm just uploading music to my USB, and I get another BSOD. I have no clue what could be causing this. I have attached the requested files for posting in this subtopic.
      My Computer
    Quote Quote

  3. Boozad
    Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       New #2

    Your ATI driver has been flagged.

    Code:
    fffff880`0993b928  fffff880`0740afa4Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
 atikmpag+0xafa4
    Download the 13.9 driver from here then use AMD Uninstall Utility to remove all traces of your current driver, CCC etc. Reboot and install the 13.9 driver.

       Note
    When installing choose 'Advanced' or 'Custom' (whichever option is available, just not Express) and uncheck everything except the video driver.


    Uninstall the following programs.

    Code:
    C:\\Program Files (x86)\\Cheat Engine 6.3
C:\\Program Files (x86)\\Razer\\Razer Game Booster
C:\\Program Files (x86)\\DAEMON Tools Lite
    1. Uninstall Daemon Tools.
    2. Download the SPTD standalone installer and follow these steps:
    3. Double click the executable to open it
    4. Click the button shown below



    If the button it is grayed out, as shown in the image, there is no more SPTD installation on your system, and you can just close the window.
      My Computer
    Quote Quote

  4. iTyphlosion
    Posts : 16
    Windows 7 x64
    Thread Starter
       New #3

    I actually never use Daemon Tools Lite, so uninstalling it should be enough, right? I followed your steps, hopefully I can avoid the BSOD now. But having not used DTL in forever I don't see a reason to re-install it, haha. Much appreciated, though!
      My Computer
    Quote Quote

  6. Boozad
    Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       New #4

    You need to complete the steps for the SPTD uninstaller, DaemonTools uses SCSI Pass-Through Direct which is the cause of the BSODs. Run it even if it's to ensure there's no trace of SPTD left on your system.
      My Computer
    Quote Quote

  7. iTyphlosion
    Posts : 16
    Windows 7 x64
    Thread Starter
       New #5

    I ran it and the button was grayed out. Much appreciated, again. :) Is there any way to avoid this in the future?
      My Computer
    Quote Quote

  8. Boozad
    Posts : 6,741
    W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
       New #6

    BSODs are random and unexpected, but you've increased your chances of it not happening again by removing all traces of SPTD.
      My Computer
    Quote Quote

 

  Related Discussions
Hi, been having this for a while now, I believe it is something to do with the memory, as it tends to do this when the computer is trying to do to much at once, however it does not happen when the graphics card is removed (original assumption) so unsure if that is part of the issue. The debug...
This has only been happening for the past few days and I haven't yet noticed any link between the times it's happened, so I don't have any idea what may be causing it. :[ I've attached both of the file options, so hopefully they'll be of use. Thank you so much in advance!
Hi all, I know this is very ambiguous, but one of my Windows 7 computers at work, a Dell Optiplex 390, has repeatedly experienced BSOD crashes over the past year. This occurs when it is being used for web browsing, and when it is left on and not being actively used. Examining the system log...
Random BSOD, unsure as to why
in BSOD Help and Support

I keep blue screening at random times, not entirely sure why. The last hardware update i did was my graphics card, currently took the new one out and using the old one. My PC seems to be stable. Here are my logs, any help would be greatly appreciated thank you.
I have been several BSOD errors in the past week. They are all different and vary quite a bit. I am unsure how record the exact errors, but I followed the instructions of the website leading me here and I have attached a zipped dmp file. I am running Windows 7 Home and I use AVG and Malware Bytes...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 05:29.
Find Us