New build BSOD 0x0000124 Blue screen crash - DM log uploaded!

Page 6 of 20 FirstFirst ... 4567816 ... LastLast

  1. Posts : 26,772
    Windows 11 Pro
       #51

    I regret to inform you, but the first pass is the fastest.
      My Computer


  2. Posts : 107
    Windows 7 Professional 64 bit
    Thread Starter
       #52

    Ah yes - 10 hours and it's only done 5 and a half passes!
      My Computer


  3. Posts : 26,772
    Windows 11 Pro
       #53

    I know how aggravating it can be, I've been there more times than I'd care to admit. Just look on the brighter side. At least you don't have 16 GB like me.
      My Computer


  4. Posts : 107
    Windows 7 Professional 64 bit
    Thread Starter
       #54

    Yes that's very true!! Currently nearing the end of pass 7 with no errors reported yet! It's recording the CPU temp as very high - 102, but I'm assuming that's possibly not too accurate. I've got the side casing off so plenty of air getting in there
      My Computer


  5. Posts : 107
    Windows 7 Professional 64 bit
    Thread Starter
       #55

    .. and on another positive note my new PSU has arrived so I can fit that as soon as the test is done in a few hours!
      My Computer


  6. Posts : 3
    Windows 7 64bit
       #56

    Hello from me! I have exactly also the same problem with my HP Pavillion dv6 - Windows 7 64bit.
    I am attaching also the dump files to check somebody and tell me what to do.

    I hope somebody could help me...
    Thanks in advance!
      My Computer


  7. Posts : 26,772
    Windows 11 Pro
       #57

    Paulgo253 said:
    Yes that's very true!! Currently nearing the end of pass 7 with no errors reported yet! It's recording the CPU temp as very high - 102, but I'm assuming that's possibly not too accurate. I've got the side casing off so plenty of air getting in there
    Stop the test! That's entirely too hot
      My Computer


  8. Posts : 26,772
    Windows 11 Pro
       #58

    nikpony said:
    Hello from me! I have exactly also the same problem with my HP Pavillion dv6 - Windows 7 64bit.
    I am attaching also the dump files to check somebody and tell me what to do.

    I hope somebody could help me...
    Thanks in advance!

    nikpony, you would be much better off if you started your own thread. You will get better service and it will be less confusing than dealing with several people in the same thread. Just go to BSOD Help and Support - Windows 7 Help Forums , click the orange button that says 'New Thread' give it a title that identifies your problem, and as much information as you can in the body of the message, attach the DM log to the message. Thanks, and you will get much better service.
      My Computer


  9. Posts : 107
    Windows 7 Professional 64 bit
    Thread Starter
       #59

    essenbe said:
    Stop the test! That's entirely too hot
    Just seen this!! I've stopped the test - it had done 8 passes with no errors, so at the least the ram is good! Why do you think the CPU was so hot and should I continue to install the new PSU?

    EDIT - just checked the BIOS CPU temp at it says its 50

    cheers

    Paul
      My Computer


  10. Posts : 26,772
    Windows 11 Pro
       #60

    Yes, install the new PSU if you are sure you know how. I am assuming you do. I would, at a minimum, clean off the old thermal paste from the CPU and cooler and apply new paste. Preferably, a new CPU cooler. It does not need to be expensive. Any one will do.
      My Computer


 
Page 6 of 20 FirstFirst ... 4567816 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:27.
Find Us