Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD networking problem - STOP 01E

31 Oct 2009   #1
GregMcClarnon

Windows 7 Professional x64
 
 
BSOD networking problem - STOP 01E

Hey Folks

I bought this top spec MESH PC in Dec '07, you can see my specs on my profile (i believe). I chose not to have Vista pre-installed and wanted to use XP until reviews etc improved.

I've installed Windows 7 Professional x64 and had no problems whatsoever; things ran perfectly and I was incredibly impressed. However, my problems began when I installed the drivers for my Belkin Wireless G USB Network Adapter (specs below).

I installed the drivers using the setup with no compatibility changes and got the BSOD. I then did some research and ran it in compatibility mode for the Belkin listed support OS and still no change; I continue to get the BSOD. I tried to figure it out myself by un-installing/re-installing and then running my PC with drivers installed but not using the internet.

I have found that the BSOD only occurs when I am active on the internet. When I load up google and start a search, it usually takes 3-5 seconds before the BSOD comes into effect.

I also tried installing v3 of the drivers and there was no change.

Apologies for the long post, I wanted to provide as much useful information as possible, there is a picture of the BSOD below.

EDIT: I've now discovered that I get 2 different BSOD.

Screenshots:
Imageshack - img1999
Imageshack - img1998g

----
Specs
----

Belkin Wireless G USB Network Adapter

Model: FSD7050
Version: v4002
FCC ID: RAXWN4501H



Thanks


My System SpecsSystem Spec
.
31 Oct 2009   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by GregMcClarnon View Post
Hey Folks

I bought this top spec MESH PC in Dec '07, you can see my specs on my profile (i believe). I chose not to have Vista pre-installed and wanted to use XP until reviews etc improved.

I've installed Windows 7 Professional x64 and had no problems whatsoever; things ran perfectly and I was incredibly impressed. However, my problems began when I installed the drivers for my Belkin Wireless G USB Network Adapter (specs below).

I installed the drivers using the setup with no compatibility changes and got the BSOD. I then did some research and ran it in compatibility mode for the Belkin listed support OS and still no change; I continue to get the BSOD. I tried to figure it out myself by un-installing/re-installing and then running my PC with drivers installed but not using the internet.

I have found that the BSOD only occurs when I am active on the internet. When I load up google and start a search, it usually takes 3-5 seconds before the BSOD comes into effect.

I also tried installing v3 of the drivers and there was no change.

Apologies for the long post, I wanted to provide as much useful information as possible, there is a picture of the BSOD below.

EDIT: I've now discovered that I get 2 different BSOD.

Screenshots:
Imageshack - img1999
Imageshack - img1998g

----
Specs
----

Belkin Wireless G USB Network Adapter

Model: FSD7050
Version: v4002
FCC ID: RAXWN4501H



Thanks
Greg

CAn you go into c:\windows\minidump, zip the dump file and upload it to us so we can debug it?

thanks and let us know if you need help with this

Ken
My System SpecsSystem Spec
31 Oct 2009   #3
GregMcClarnon

Windows 7 Professional x64
 
 

Zip file is below, I haven't used mediafire before so let me know if you would like it uploaded a different way. Also, I've just found another BSOD, image is below:

Image: http://img259.imageshack.us/img259/144/img2000a.jpg

MiniDump files: Free File Hosting Made Simple - MediaFire
My System SpecsSystem Spec
.

31 Oct 2009   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by GregMcClarnon View Post
Zip file is below, I haven't used mediafire before so let me know if you would like it uploaded a different way. Also, I've just found another BSOD, image is below:

Image: http://img259.imageshack.us/img259/144/img2000a.jpg

MiniDump files: Free File Hosting Made Simple - MediaFire
Greg Thanks and welcome

There is a way that will be easier for you to upload. To attach something to upload you use the attachment icon (its shaped like a paperclip) in the reply form. Click on it and add the files for upload. Im going to take a quick peek at this one and be right back.
Just trying to make your life easier

Ken
My System SpecsSystem Spec
31 Oct 2009   #5
GregMcClarnon

Windows 7 Professional x64
 
 

Thanks for your time Ken, I've attached the same zip file for you.
My System SpecsSystem Spec
31 Oct 2009   #6
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by GregMcClarnon View Post
Zip file is below, I haven't used mediafire before so let me know if you would like it uploaded a different way. Also, I've just found another BSOD, image is below:

Image: http://img259.imageshack.us/img259/144/img2000a.jpg

MiniDump files: Free File Hosting Made Simple - MediaFire
Greg

Hi and welcome
I took a quick look at the last 4 dump files. although different files were the probable causes of the crash one thing seems to be evident. There seems to be a memory componenet. The bugcheck 24 is usually caused by faulty ram, and in 2 of the four I looked at there was also memory corruption. There are also some very old drivers dating from as far back as 2006.

Usual causes: Insufficient disk space, Device driver, Video card, BIOS, Hardware incompatibility, Memory.

I suggest
update old drivers especiaolly the atheros
run an overnight memory test (memtest is built in)
If you are overclocking stop
Run a system file check. To run type cmd in search>right click and run as admin>
SFC /scannow
let us know the results



Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\103109-25755-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*Symbol information
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`0285c000 PsLoadedModuleList = 0xfffff800`02a99e50
Debug session time: Sat Oct 31 08:47:03.498 2009 (GMT-4)
System Uptime: 0 days 0:01:36.823
Loading Kernel Symbols
...............................................................
................................................................
...................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\athrxusb.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athrxusb.sys
*** ERROR: Module load completed but symbols could not be loaded for athrxusb.sys
Probably caused by : athrxusb.sys ( athrxusb+500d1 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: 0000000000000000, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000000, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception

Debugging Details:
------------------


EXCEPTION_CODE: (Win32) 0 (0) - The operation completed successfully.

FAULTING_IP:
+609a952f03b4d944
00000000`00000000 ?? ???

EXCEPTION_PARAMETER1: 0000000000000000

EXCEPTION_PARAMETER2: 0000000000000000

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x1E

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 2

EXCEPTION_RECORD: fffff80003c737c8 -- (.exr 0xfffff80003c737c8)
ExceptionAddress: fffff88003aaa0d1 (athrxusb+0x00000000000500d1)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff

TRAP_FRAME: fffff80003c73870 -- (.trap 0xfffff80003c73870)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=a6308ab84cf4e5ba rbx=0000000000000000 rcx=fffffa8004955030
rdx=fffffa800499fa18 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88003aaa0d1 rsp=fffff80003c73a00 rbp=0000000000000000
r8=0000000000000b00 r9=0000000000000000 r10=fffff8000285c000
r11=0000000000000002 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
athrxusb+0x500d1:
fffff880`03aaa0d1 ?? ???
Resetting default scope

LAST_CONTROL_TRANSFER: from fffff800028c5c2e to fffff800028cded0

STACK_TEXT:
fffff800`03c728a8 fffff800`028c5c2e : fffffa80`000025b6 fffff800`000024f8 fffff800`03c73020 fffff800`028fae28 : nt!KeBugCheck
fffff800`03c728b0 fffff800`028f3bed : fffff800`02adac24 fffff800`02a13a3c fffff800`0285c000 fffff800`03c737c8 : nt!KiKernelCalloutExceptionHandler+0xe
fffff800`03c728e0 fffff800`028fb250 : fffff800`02a1ba88 fffff800`03c72958 fffff800`03c737c8 fffff800`0285c000 : nt!RtlpExecuteHandlerForException+0xd
fffff800`03c72910 fffff800`029081b5 : fffff800`03c737c8 fffff800`03c73020 fffff800`00000000 fffffa80`04cd3480 : nt!RtlDispatchException+0x410
fffff800`03c72ff0 fffff800`028cd542 : fffff800`03c737c8 fffffa80`04cd3673 fffff800`03c73870 00000000`00000000 : nt!KiDispatchException+0x135
fffff800`03c73690 fffff800`028cbe4a : fffff880`031dbbe0 fffff880`04805f79 fffffa80`047ca010 00000003`00000000 : nt!KiExceptionDispatch+0xc2
fffff800`03c73870 fffff880`03aaa0d1 : 00000000`00000000 00000000`00000000 fffffa80`0499bb70 fffffa80`0499bc74 : nt!KiGeneralProtectionFault+0x10a
fffff800`03c73a00 00000000`00000000 : 00000000`00000000 fffffa80`0499bb70 fffffa80`0499bc74 a6308ab8`4cf4e5ba : athrxusb+0x500d1


STACK_COMMAND: kb

FOLLOWUP_IP:
athrxusb+500d1
fffff880`03aaa0d1 ?? ???

SYMBOL_STACK_INDEX: 7

SYMBOL_NAME: athrxusb+500d1

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: athrxusb

IMAGE_NAME: athrxusb.sys


DEBUG_FLR_IMAGE_TIMESTAMP: 45bdef26

FAILURE_BUCKET_ID: X64_0x1E_athrxusb+500d1

BUCKET_ID: X64_0x1E_athrxusb+500d1

Followup: MachineOwner



secdrv.SYS fffff880`07f40000 fffff880`07f4b000 0x0000b000 0x4508052e 9/13/2006 9:18:38 AM
athrxusb.sys fffff880`03a5a000 fffff880`03aec000 0x00092000 0x45bdef26 1/29/2007 8:57:10 AM
nvm62x64.sys fffff880`04200000 fffff880`04263d80 0x00063d80 0x48f8fd12 10/17/2008 5:01:06 PM


---------

Hope this helps



Ken
My System SpecsSystem Spec
31 Oct 2009   #7
GregMcClarnon

Windows 7 Professional x64
 
 

Thanks Ken,

What do you mean by Atheros? I've heard of Atheros but I can't recall where from? I did try to find out for myself, is it the drivers on my router or my Belkin stick? Or am I on completely the wrong subject?

Thanks
My System SpecsSystem Spec
31 Oct 2009   #8
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by GregMcClarnon View Post
Thanks Ken,

What do you mean by Atheros? I've heard of Atheros but I can't recall where from? I did try to find out for myself, is it the drivers on my router or my Belkin stick? Or am I on completely the wrong subject?

Thanks
dont you have an atheros USB wifi?
My System SpecsSystem Spec
31 Oct 2009   #9
GregMcClarnon

Windows 7 Professional x64
 
 

No. I've got a Belkin Wireless USB. The specs are:

Belkin Wireless G USB Network Adapter

Model: FSD7050
Version: v4002
FCC ID: RAXWN4501H
My System SpecsSystem Spec
31 Oct 2009   #10
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by GregMcClarnon View Post
No. I've got a Belkin Wireless USB. The specs are:

Belkin Wireless G USB Network Adapter

Model: FSD7050
Version: v4002
FCC ID: RAXWN4501H

Ok

athrxusb.sys is an atheros driver it might be used by belkin as well. Is the belkin usb? If not I wonder why that driver was installed?

Ken
My System SpecsSystem Spec
Reply

 BSOD networking problem - STOP 01E




Thread Tools




Similar help and support threads
Thread Forum
Bsod problem bad_pool_header stop :0x00000019
Hello to everyone I am new here. I'm getting a BSOD problem while opening my wireless network connection or setting up the adhoc network connection or trying to configure my network device on my laptop this problem occur to me many times but I dont know how to solve this problem. Thanks in...
BSOD Help and Support
Stop WiFi adapter using internet, but retain networking capabilities.
I have a wired Ethernet connection directly into my modem, I also have a WiFi dongle connected to a router so that i have network access to other machines. The WiFi network is also providing me with internet, i dont want the internet because i think it my confuse certain applications, how will they...
Network & Sharing
BSOD mobo integrated graphics problem STOP 0x116: VIDEO_TDR_ERROR
Hello, This has happened twice today after trying to watch youtube videos in fullscreen. I get BSOD and the error problem I get is Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 2057 Additional information about the...
BSOD Help and Support
SP1 Networking problem
I have installed Windows 7 SP1 final (via windows update) on an Acer Aspire 1410-8414 notebook, with Windows 7 home premium installed. Now no browser will load any website. The computer connects to the internet, and media players will open streaming net radio and tv stations...
Network & Sharing
Networking Problem, Please Help!
For as long as I can remember, my system tray network icon has said "Not Connected--connections are available" when I hover over it. I am, however, connected to the internet. Recently this has caused more problems for me. Since my computer seems to think I'm not connected, it won't let me set up...
Network & Sharing
problem with networking
HI I connected win xp with win7 before and it probably work . now i've changed my win xp and connected it again . now when I want to logging in win 7 it doesn't have any problem but when i want to logging in win xp it show me a windows that says enter your user name and password . I have define a...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:36.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App