BSOD Error 0x50 After New Windows Update

Page 3 of 4 FirstFirst 1234 LastLast

  1. Posts : 11
    Windows 7 Home Premium 64bit
    Thread Starter
       #21

    Now I'm pretty sure that the 0x50 Error that I got is from a Windows Update. Did you guys try doing a Memory Diagnostic Tool or a memtest86?
      My Computer


  2. Posts : 7
    Windows 7 pro 64 bit
       #22

    BSOD after Aug 14th Windows updates


    Hi All, This has become a known issue for many with Win7 and 8 64 bit but not all machines apparently. The solution is to either delete c:\Windows\System32\FNTCACHE.DAT or rename it (as I did as a precaution) and the problem appears to go away with the first action or not happen with the second. Of course my machine may have been one of the ones not affected but why risk it? Extensive info and discussion of the problem here Blue Screen (Stop 0x50) after applying update KB2982791 to - Microsoft Community Of course you will have to get into the computer first by means of an installation or repair disc and get a DOS prompt to carry out the deletion or name change. The FNTCACHE.DAT file is rebuilt when you reboot successfully. Regards, Brian
    Last edited by bseales; 15 Aug 2014 at 14:21.
      My Computer


  3. Posts : 11
    Windows 7 Home Premium 64bit
    Thread Starter
       #23

    I haven't had problems with the new Windows Update at this point... But is it safe to delete FNTCACHE.DAT? Would it make a difference if I delete this file? I don't want to get a Blue Screen again, but I don't want to risk deleting a file that might cause problems for me down the road.
      My Computer


  4. Posts : 3
    Windows 7 Home Premium 64-bit SP1
       #24

    ^ exactly why I am not doing the update and waiting for official fix.
      My Computer


  5. Posts : 7
    Windows 7 pro 64 bit
       #25

    Deleting the FNTCACHE.DAT file


    After deleting it or renaming it, FNTCACHE.DAT is rebuilt on rebooting. Loads of people are reporting that this fix works and that the update KB2970228 is causing the issue. I decided to rename the file after the updates were installed but before rebooting, as a preventative measure because I am in the middle of doing important work on the PC. I never had a BSOD in the first place. KB2970228 is still installed on the machine. This particular update is to do with displaying the Russian currency symbol so it is hardly an important recommended update as Microsoft called it. Leave it out of your updates until they fix it and you should be fine. Regards, Brian
      My Computer


  6. Posts : 3
    Windows 7 home premium-64
       #26

    I've tried to rename the fntcache.dat file and deleting it, but nothing works. I always get the bluescreen on startup..driving me insane!
      My Computer


  7. Posts : 11
    Windows 7 Home Premium 64bit
    Thread Starter
       #27

    I think the problem might be something else... For me, everything worked out fine. I didn't need to rename the FNTCACHE.DAT file. I think my problem was updating 12 updates at the same time, which might have caused my computer to Blue Screen.

    Have you tried restoring back to a point before all of the Windows Update?
      My Computer


  8. Posts : 7
    Windows 7 pro 64 bit
       #28

    Microsoft update on BSOD


    There is an extensive guide to recovering a PC which has been posted by Microsoft. The updates are now acknowledged to have caused a problem on many PCs and it appears to be an Open Type font related issue. For those of you who have found that deleting the fntcache.dat file has not solved the problem then have a look at the known issue 3 method on this page as it deals with temporarily removing the Open Fonts. Then it recommends removing 4 updates which are causing the problem. Perhaps some of the other known issues listed may help also. MS14-045: Description of the security update for kernel-mode drivers: August 12, 2014 Regards and good luck with it.
      My Computer


  9. Posts : 3
    Windows 7 home premium-64
       #29

    lvt08 said:
    I think the problem might be something else... For me, everything worked out fine. I didn't need to rename the FNTCACHE.DAT file. I think my problem was updating 12 updates at the same time, which might have caused my computer to Blue Screen.

    Have you tried restoring back to a point before all of the Windows Update?
    After many painful hours i managed to restore it at a point before the update. I didn't work the first time i tried it, but in my desperation I tried it one more time and it worked. Nothing has ever felt so good

    I have now updated with every single update and no more bluescreen. might have been to many updates at the same time.
      My Computer


  10. Posts : 7
    Windows 7 pro 64 bit
       #30

    Well done Bleuscreen


    Glad that restore worked for you as I am reading elsewhere that restore is failing for many people. They have no restore points to revert back to for some reason. It appears that this issue manifests itself in many different ways on different systems. Regards
      My Computer


 
Page 3 of 4 FirstFirst 1234 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:58.
Find Us