Frequent BSOD cannt read error messages

mvedda · 21 Aug 2014

Hi,
Blue screens mainly occur while playing marvel heroes. But will also occur when streaming media over plex. I do not get any error codes or anything as the bsod is actually just the light blue screen but all of the writing is not legible. It really just looks like a blue screen with lines randomly inserted into the image. Also my second monitor keeps whatever was displayed previously and does not change at all.

I have ran the intel ssd management tools and the disk health comes back fine. Also ran scf /scannow and no errors were detected. I also went ahead and reseated my ram and graphics card. The errors started after a windows update so I rolled back those updates as well but the issue still occured so i reapplied the updates.

files are attached.

thank you

Arc · 22 Aug 2014

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Dont run any disc cleanup program before you upload another zip.

mvedda · 22 Aug 2014

It was actually not creating a dump file previously even tho it already was set up to. I went and enabled the page file on my secondary HDD and we will see if it decides to create a dump file during the next bsod.

Arc · 22 Aug 2014

If not, take a camera snap of the BSOD screen and upload it here.

mvedda · 23 Aug 2014

This time I was streaming a movie to my xbox one, paused it, and walked away for an hour or two. Recieved a dpc_watchdog bsod. Files attached. But I do think this one may have been unrelated to my previous issue. I had just set up Plex as a DLNA server to stream to my xbox one and the log files grew to over 60gb. I went ahead and undid this.

Arc · 24 Aug 2014

It is a rare bugcheck.

Code:

BugCheck 133, {1, 1e00, 0, 0}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

I am facing it for the first time, but I could assure you that I will try my best to assist you.

But not networx. It is a very common issue. It is problem wherever it is present. One of the most frequent BSOD causer I can say.

Code:

ffffd000`4a08e8a8  fffff800`fadae862Unable to load image networx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for networx.sys
*** ERROR: Module load completed but symbols could not be loaded for networx.sys
 networx+0x7862

Uninstall Networx.

Code:

Start Menu\Programs\NetWorx

Then try to perform the same job once again. See how it goes. Let us know.