Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Windows 7 Ultimate

25 Aug 2014   #1

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
BSOD Windows 7 Ultimate

Please help me out in solving BSOD on my laptop

Thanking you in advance,


My System SpecsSystem Spec
25 Aug 2014   #2

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

BugCheck 109, {a3a039d89d3f7597, b3b7465eefbdb0a1, fffff880009f4640, 3}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
This bugcheck is generated when the kernel detects that critical kernel code or data have been corrupted. There are generally three causes for a corruption:
  1. A driver has inadvertently or deliberately modified critical kernel code or data. See Kernel patch protection for x64-based operating systems
  2. A developer attempted to set a normal kernel breakpoint using a kernel debugger that was not attached when the system was booted. Normal breakpoints, "bp", can only be set if the debugger is attached at boot time. Hardware breakpoints, "ba", can be set at any time.
  3. A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If there is no error, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec

 BSOD Windows 7 Ultimate

Thread Tools

Similar help and support threads
Thread Forum
Bsod windows 7 ultimate 32 bit
I really need help with this BSOD... It was happening with my multibooted 64 and 32 bit versions of windows 7 Ultimate and i thought it was something to do with the 3 OS being installed so i took my Linux Distro off and my 2 versions of windows and re-installed windows 7 ultimate 32 bit on...
BSOD Help and Support
BSOD Windows 7 Ultimate x64
BSOD happens a few times a day. Windows 7 Ultimate x64 Retail version Fresh install two months ago. AMD Athlon II x4 640 NVIDIA GTX 460 Asus m4a88td RAM 4gb DDR 1333
BSOD Help and Support
Windows 7 Ultimate 64 bit BSOD HELP! PLEASE
this is an retail install. About 2 months old Please help!:(
BSOD Help and Support
Windows 7 ultimate x64 BSOD
I've been getting BSOD for that past few months and have had no luck in resolving my issue. So far i've replaced all my hardware in the pc and still getting Error's. At first i thought it was memory. So replace both 2 gig strips. Then replaced power supply. After still getting bsod i replaced the...
BSOD Help and Support
BSOD Windows 7 ultimate 64-bit
Here's the dump info: Anyone have any clue on what could be causing this? It's very randomly happening. Not always doing the same thing when it happens. ............................................................... ...................................................................
BSOD Help and Support
BSOD During upgrade from Vista Ultimate to 7 Ultimate
I've tried to upgrade from Vista Ultimate 32 bit to 7 Ultimate 32 bit numerous times now, all with the same result: a BSOD during the install process, which I get during (what I think is) the final step called "Transferring files, settings and programs." The installation compatibility test warns...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:25.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App