Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Random BSOD's at random times often error 0x0000001E

02 Sep 2014   #21

Windows 7 Ultimate 64 bit

Ok thanks. Got another torn into stripes screen with the verifier enabled, before i could read your latest posts. File attached (

Amd Sata AHCI and AMD USB was not installed but now is. SSD Firmware was 5.03 but not 5.05, which it is now. I updated it from 1.3 to 5.03 earlier, not knowing there's a newer version. BIOS is up to date, as I mentioned earlier in this thread.

EDIT: Alright, after restarting Windows installed something for the SSD and a HDD and told me to restart. I think we are getting closer

EDIT2: Was watching something on and after 1 min the error message in the picture attached popped up and everything opened crashed, except Windows (got thrown to desktop). After restarting once again, everything seems to be fine, as I'm writing this. Created another SF zip: SF_02-09-2014_3

EDIT3: Here we go again. BSOD 0x0000001E. Dump file 090214-13046-01 in the SF_02-09-2014_4 zip. Uninstalling and sweeping ATI/AMD graphics driver and installing the beta one now.

My System SpecsSystem Spec
02 Sep 2014   #22

Windows 10 Pro/ Windows 10 Pro Insider

That's a Windows Error reporting function. It is either corrupt or you habe other files missing. Let's try this again

Open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.
My System SpecsSystem Spec
02 Sep 2014   #23

Windows 7 Ultimate 64 bit

Ok scannow did not find anything. Installed the ATI/AMD beta graphics driver. What about the other fails, torn into stripes with verifier enabled and BSOD I mentioned ?

EDIT: BSOD. Dump file 090214-15640-01.
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arg1: fffff80003c0bfc8, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bitfield :
	bit 0 : value 0 = read operation, 1 = write operation
	bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002a98090, address which referenced memory

Debugging Details:

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002cca100


fffff800`02a98090 498b84cac8ef1e00 mov     rax,qword ptr [r10+rcx*8+1EEFC8h]





TRAP_FRAME:  fffff88002f8d290 -- (.trap 0xfffff88002f8d290)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002a98090 rsp=fffff88002f8d420 rbp=0000000000000006
 r8=0000000000000000  r9=0000000000000003 r10=fffff80002a1d000
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe nc
fffff800`02a98090 498b84cac8ef1e00 mov     rax,qword ptr [r10+rcx*8+1EEFC8h] ds:bd10:fffff800`02c0bfc8=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002a92169 to fffff80002a92bc0

fffff880`02f8d148 fffff800`02a92169 : 00000000`0000000a fffff800`03c0bfc8 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`02f8d150 fffff800`02a90de0 : 00000000`0000000a fffffa80`0d5343b0 fffff880`02f65180 fffffa80`0ef2e600 : nt!KiBugCheckDispatch+0x69
fffff880`02f8d290 fffff800`02a98090 : fffff880`009ea180 fffffa80`137dab50 00000000`00000000 fffffa80`136432e0 : nt!KiPageFault+0x260
fffff880`02f8d420 fffff800`02a9d787 : fffffa80`0ef2e5f0 fffffa80`0ef2e638 fffffa80`0ef2e638 fffffa80`137dabf0 : nt!KiDeferredReadyThread+0x180
fffff880`02f8d4a0 fffff800`02a9d5de : 00000001`1e40c810 fffff880`02f8db18 00000000`00007810 fffff880`02f67788 : nt!KiProcessExpiredTimerList+0x157
fffff880`02f8daf0 fffff800`02a9d3c7 : 00000000`6fffcbc2 00000000`00007810 00000000`6fffcbc4 00000000`00000010 : nt!KiTimerExpiration+0x1be
fffff880`02f8db90 fffff800`02a8a8ca : fffff880`02f65180 fffff880`02f700c0 00000000`00000000 fffff880`04179480 : nt!KiRetireDpcList+0x277
fffff880`02f8dc40 00000000`00000000 : fffff880`02f8e000 fffff880`02f88000 fffff880`02f8dc00 00000000`00000000 : nt!KiIdleLoop+0x5a


fffff800`02a98090 498b84cac8ef1e00 mov     rax,qword ptr [r10+rcx*8+1EEFC8h]


SYMBOL_NAME:  nt!KiDeferredReadyThread+180

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  ntkrnlmp.exe


FAILURE_BUCKET_ID:  X64_0xA_nt!KiDeferredReadyThread+180

BUCKET_ID:  X64_0xA_nt!KiDeferredReadyThread+180

Followup: MachineOwner
My System SpecsSystem Spec

02 Sep 2014   #24

Windows 7 Ultimate 64 bit

It never stops: Next BSOD. Dump file 090214-13046-02.
My System SpecsSystem Spec
02 Sep 2014   #25

Windows 10 Pro/ Windows 10 Pro Insider

griachae, I am believing this is either the GPU, Motherboard or the PSU. I really am not familiar with the brand of PSU. I do understand that it is well thought of in Europe. Here in the US, this is the best review site we have. I would like you to go there and read the reviews on your Motherboard ASRock 970 PRO3 R2.0 AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard with UEFI BIOS - Your GPU, on the other hand gets great reviews. GIGABYTE GV-R787OC-2GD Radeon HD 7870 GHz Edition 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card - .

So, I would like to know if you have another graphics card or have a friend who has a spare or would be willing to swap cards with you for a test. PSU and Motherboards are 2 things we have few if any good tests for. We can test the PSU, but it is difficult when under load. The Motherboard is just the process of elimination. Also, did you download and install your Lan Driver?

How opposed are you to make a clean install?

EDIT: I've also called in the cavalry.
My System SpecsSystem Spec
03 Sep 2014   #26

Windows 7 Ultimate 64 bit

Well to be honest I'm not the biggest fan of my mainboard anymore and I bought it back then, although a friend said it's not good and he heard bad stuff about it. The reviews I've read on the site you linked to both the Graphics Card and the Mainboard are quite mixed to be honest, but I can feel what this guy is writing about:
Pros: Great Layout - Good Features - Great Price!

Cons: AM3+ issues with Piledriver tech. Not fully supported.
BSOD's for days!
Cant go 3 hours without a freeze or BSOD

Other Thoughts: I purchased this board back in February of this year, I am a Broadband Analyst by trade and my home PC is a must! This was a budget build but had I known these would be the case I would have put out a bit more.

CPU - FX6300
Ram set 1 - G.skill DD3-1333 PC3-10666 4 G sticks X2

Ran Set 2 (Purchased it this weekend) PNY XLR8 8Gb stick -1600 Mhz -Cas 9 - 1.5v - DDR3 PC3 12800

When I received the board I stick a fresh isntal of Windows 8 on it, after contacting Microsoft about various BSOD's they remoted in ran their test for about 5 min and another BSOD issue - logged back in tried again and crash they tried for 3 hours. This is after me trying to reinstall Win 8 3 more times OFC.

So, Windows 7 - installed fine, posted, default UEFI Bios settings - BSOD's or freezes and pretends to be receiving input.

Tuned settings, turned X-boost on - stabile for days with X-boost, but it seems to have an excelorator problem, Games when played are out of sync videos are choppy. Turn X-boost off tand that goes away but so does the stability.

Bios was under volting and does not detect proper timings from both sets of ram. changed to 1.5 V on ram and proper timings (9-9-9-24) and still no resolve.

Extensive ram testing, multiple NEW sticks of ram (I've invested more in new hardware at this point than I would have if I would have purchased new $200 board =x)

needless to say after MONTHS of trial and error, and doing my part in ironing out all possible bugs, its past my return time for new egg, and the flimsy structure on the board and its odd PCI-E clips (Broke on day 1) I now have voided any chance of an RMA with ASRock. AVOID THIS BOARD! Months of work, and still giving me issues...

This board is coming out next pay period and I will never buy anything from ASRock again..

Oh and customer service / Tech support from them - It's non exsistant.

Manufacturer Response:
Dear ASRock Customer

We sincerely apologize for any inconvenience this may have caused you.
For the BSOD, please download and update the latest BIOS at " ASRock > 970 Pro3 R2.0 " .
Set the UEFI BIOS default.
Test with single memory module on A1 or A2 slot, switching another memory if its same issue.
Check the CPU is not overheating.
If you have any technical issues please contact us at ASRock > Support Request Form. We will assist you shortly.

Thank you

Tech Support Email: ASRock > Support Request Form
After reading this I almost want to buy a new mainboard right away.

I have an old Nvidia GPU lying around somewhere. I could test with that one i guess. Can't remember the model right now but I've been using it before on my old mainboard and had no problems at all.

I installed the latest LAN driver from the realtek site not the mainboard site and I think it's better that way.

Clean install: Uninstall all ATI/AMD software. Reboot. Reboot into safe mode. Run drive sweeper and select all ATI dirvers. Reboot and install new driver.
My System SpecsSystem Spec
03 Sep 2014   #27

Windows 10 Pro/ Windows 10 Pro Insider

Try your Nvidia graphics card, but first be sure to uninstall your AMD drivers, then clean out the lrftover drivers (Drivers - Clean Left over Files after Uninstalling)
then shut down and install the card. When you boot back up install the graphics drivers. Let me know how that goes and what card model it is. The test will be meaningful, simply because if it works with no problems, that means you most likely have a bad card or a bad PSU.

When they first came out, I bought a Gigabyte 6950OC. It has been a great card and is still working in another machine. They do make some good cards. But, the Nvidia card should tell us the PCIe slot is working right. That really only leaves 2 things it could be. Other than drivers, there is little involved other than the PSU supplying power and the card itself.
My System SpecsSystem Spec
03 Sep 2014   #28

Windows 10 Pro/ Windows 10 Pro Insider

Sounds like you have it down pretty much. Sorry you are having such a bad experience. I can sympathize. I've been there before.
My System SpecsSystem Spec
03 Sep 2014   #29

Windows 7 Ultimate 64 bit

Okay thanks. I will do so but that's gonna take at least until Sunday. Can you recommend any mainboard that fits? I want to buy the same GPU and run it crossfire with the first one at some day, if it's not the reason for my crashes. But I will need a new PSU that day I guess.

The PSU is a C49089 BE QUIET PURE POWER L7 530W and I have not heard a single bad thing about be quiet before. The 530W should be enough, am I right?
My System SpecsSystem Spec
03 Sep 2014   #30

Windows 10 Pro/ Windows 10 Pro Insider

Yes, that should be enough. I wasn't implying it wasn't a good one, but it is only recently I have seen Be Quiet starting to come into the US, so I'm not familiar with them. I have a friend in the UK and we talk frequently. He has told me that the brand is very well thought of there. but, even the best brands can go bad occasionally.

I would imagine you may need another PSU if you do CFX. I'll do some research on another board. I will be happy to, but you may need to remind me. I stay pretty busy on these forums, but my fun comes from researching other products and doing new builds. So, I would be more than happy to help you find a new board.

The time is up to you, so it is no problem. We never close, we're here 24/7.
My System SpecsSystem Spec

 Random BSOD's at random times often error 0x0000001E

Thread Tools

Similar help and support threads
Thread Forum
BSOD in random times with error code 0x0000001E
Hey guys! I dont know why but i get BSOD with the massage 0x0000001E. Sometimes i dont get it like for 3 days, but sometimes i get it like 3 times in less than 12 hours. Here is a log from dm log collector. Hope u can help me with this one. :(
BSOD Help and Support
BSOD at random times error 0x0000001e, 0x00000034, and 0x0000003b
My computer has recently taken to blue screening seemingly at random. I recently had a virus that was cleaned up with Spyhunter 4. The system was fine for a few days then blue screened when I was away and restarted throwing the 3b error. Over the past few days the errors have become more and more...
BSOD Help and Support
BSOD at random times, error 0x0000001E and 0x0000001A
Hi everyone, recently our desktop computer has started to crash and get the dreaded BSOD. Initially it appeared to be a problem with a driver for one of our phones, which I removed but the problem has resurfaced. Seems to be getting more regular and taking the computer longer to reboot and login...
BSOD Help and Support
Random BSOD during Random times, error 0x8000000000000002
Hey everyone, Im new here on this forum. I've been having this extremely frustrating problem ever since i swapped out my Motherboard for a new one. I reformatted my computer multiple times, yet my computer seems to BSOD randomly. What happenes is that everything becomes unresponsive; cant...
BSOD Help and Support
BSOD at random times error 0x0000001e
Hello, first off i want to say thank you for viewing this thread, secondly i believe the error code was 0x0000001e (if not im sorry i uploaded as instructions of everything) I ran Memtest for atleast 10 hours and no errors what so ever. I have had problems with my Desktop ever since i did a...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:34.
Twitter Facebook Google+