Kernel Power Event ID 41, tried new PSU, new Motherboard, no results.

I have been getting Kernel Power Event ID 41 errors almost hourly for the past 3 weeks.
At first I thought it was my old video card, the GTX 560, and I wanted a new card, so i bought a r9 270x on ebay.
The errors continued.
Then I bought a new motherboard, because sometimes when I would get the error, the computer would not turn back on when i pushed the power button. The case would turn on, but the GPU fans and the CPU fan would stay still. The fix was to unplug the system, and unplug the 8 pin cpu power cable, the 24 pin mother board cable, and the graphics care cables. The system would then work again until the next crash.
So the new motherboard came, and I installed it, and the errors continued.
I read more about the issue, and figured I would buy a new power supply from bestbuy, and just return it depending on what happens. It solved nothing.
I tried changing from my surge protector to the wall, and still get the error every hour or two, no matter what I'm doing.

Also, I am getting the error on clean installs of windows, and have run prime95 and furmark for over 30 minutes, and have had 3 successful runs of memtest.

I would upload the BSOD logs, except I don't think there are any from this error. It's just an unexpected shutdown.

I really could use your help in fixing this. I'm willing to buy new components and everything.

Attached is my speccy data. I am running the programs and commands you listed as we speak.

Is Mbam and the spyware programs needed if I get this shutdown an hour or so after a clean install?

ICit2lol said:

No flobots they are not and the temps look ok to me so it is pointing at some hardware problem and the furst port of call would be the PSU so it might e an ideas to run some testing on it.

UsingHW Info PSU

Download HW Info and pick the right bit version - HWiNFO, HWiNFO32/64 - Download -(copyand paste this site into the search bar) If you do not need the runninginformation in the smaller right hand panel close it. In the left hand windowclick on the + for the individual device groupings and they will open out tothe various components.

Go on opening out further until you get to the device itself. click on it andit will highlight. In the right hand window there will be a very detaileddescription of that device as in brand, speeds model number etc etc These arevery detailed and are just what is needed for searching for drivers etc.

To getthe PSU volts you need to select the Sensor button circled in yellow in the picfor PSU testing do the same and scroll down the readout as in my pic to whereit has Nuvoton = yours might be a different section name / title. Post back apic of that please.

If you want a more definitive test see this https://www.sevenforums.com/tutorials/301799-psu-test-dc-output-voltage.html butlease only use a digital multimeter and not an analogue as they injecttypically 9v into a circuit to test and into a 3.3v or 5v rail - not a good idea!!see the partial pic of the correct sort of meter in that tutorial. details ifyou scroll down that listing.

Now a good reference article is this
Voltage Rails - Power Supply 101: A Reference Of Specifications it will explain in detail what the voltages are and functions of the PSU/

I got the same errors on two separate PSUs. My 10 month old CX600 and a brand new CX750M

It is Event 41, Kernel-Power. "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
Log name: System
Source: Kernel Power
Event ID: 41
Level: critical
Task Category: 63