New
#1
Another Kernal Power 41...
I will start off stating that I have done a bit of searching and tried what others suggest and still to no vial. This issue start occurring as of 2 days ago, I was planning on re installing windows 7 anyway, even before I started getting the error. Did the fresh install, and shortly after getting it back up and running it started crashing again. I had this issue happen about 6 months ago, and as it turned out it was an audio driver that was causing it. Tried to un install the driver, same issue, updated the realtek audio drive, same issue. Then I moved onto thinking it might be Bitdefender causing it, switched to Norton and still causing it.
No BSOD or dump files to get any help so I am kind of dead in the water and running out of ideas to try. I am fairly confident that it's software related as it is stable when I run Mint off my flash drive. The other think I was thinking of doing was to disable the audio driver completely and monitor if it does it again. Any other ideas?
Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 10/10/2014 4:00:33 PM
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: Alpha-PC
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-10-10T21:00:33.356403200Z" />
<EventRecordID>2458</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Alpha-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>