New
#21
OK Nick, Here is what I want you to do. Remove the bottom card, run Furmark, then, remove that card and put it in the slot you use for your second card and run Furmark again. Now remove that card and do the exact same thing with the second card, try it in both slots. On both cards in each slot I want you to after running Furmark, let it cool down then run the benchmark. Write down the score and the core clock and memory clock each time for both cards. Download GPUz (GPU-Z Video card GPU Information Utility) watch out for all the add ons they like to install with it. Just uncheck them. If you can keep it open to the sensor tab and it will tell you almost everything. So, write down as much info as you can about both cards in both slots. Run any other benchmark you usually use. I always like running Ungine Heaven (Heaven Benchmark | Unigine: real-time 3D engine (game, simulation, visualization and VR)) it will work the card just as hard and is much more interesting than Furmark. Try it set to the pre configured Extreme Setting and run the Benchmark. I'll show you how to set the test up, then once the test starts and everything gets loaded and starts moving, press the benchmark tab in the top left corner. Run it on both cards in both slots and note all the details plus the score and the min and max FPS as well as the core clock memory clock.
the set up should look like this. Then just push run, once it starts moving press benchmark.
Attachment 337604
Quote