Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD Apparantly random

16 Oct 2014   #11

Windows 7 Ultimate x64

The program crashed when I clicked F9 to take a screen shot. Luckily I was able to get a print screen.

The Average & Max FPS is so high because I turned off the rendering of the furry object for about 5 Seconds, I hope that isn't an issue. Thanks again.

My System SpecsSystem Spec
16 Oct 2014   #12

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

As far as I can see, it does not look bad.

Now use the computer normally. Dont install the latest nvidia driver back. Report us for any further BSOD.
My System SpecsSystem Spec
16 Oct 2014   #13

Windows 7 Ultimate x64

Thank you very much for your assistance Arc. You were very helpful.
My System SpecsSystem Spec

16 Oct 2014   #14

Windows 7 Ultimate x64

It lasted longer than it had since the issue arose but it's crept back. Was watching a Youtube video and boom. Then happened again when I rebooted and opened my Mail client.

Dumps attached.

*Edit* - I've tried this recommendation. In case you need to know Arc, or whoever may reply.
My System SpecsSystem Spec
16 Oct 2014   #15

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Same BSOD with multiple versions of display driver.

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator - The most trusted PSU Wattage Calculator
Also let us know the wattage of the PSU.
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa8011b33010, fffff880100237a0, ffffffffc000009a, 4}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9a57a0 )

Followup: MachineOwner

7: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Attempt to reset the display driver and recover from timeout failed.
Arg1: fffffa8011b33010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff880100237a0, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.

Debugging Details:

fffff880`100237a0 48ff25f94eedff  jmp     qword ptr [nvlddmkm+0x87a6a0 (fffff880`0fef86a0)]






ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre

fffff880`044dea48 fffff880`0510a134 : 00000000`00000116 fffffa80`11b33010 fffff880`100237a0 ffffffff`c000009a : nt!KeBugCheckEx
fffff880`044dea50 fffff880`050dd867 : fffff880`100237a0 fffffa80`10356000 00000000`00000000 ffffffff`c000009a : dxgkrnl!TdrBugcheckOnTimeout+0xec
fffff880`044dea90 fffff880`05109f43 : fffffa80`ffffd846 ffffffff`fffe7960 fffffa80`11b33010 00000000`00000000 : dxgkrnl!DXGADAPTER::Reset+0x2a3
fffff880`044deb40 fffff880`051da03d : fffffa80`0fdc0310 00000000`00000080 00000000`00000000 fffffa80`0fd9c410 : dxgkrnl!TdrResetFromTimeout+0x23
fffff880`044debc0 fffff800`0371173a : 00000000`023a2996 fffffa80`10306b50 fffffa80`09765450 fffffa80`10306b50 : dxgmms1!VidSchiWorkerThread+0x101
fffff880`044dec00 fffff800`034668e6 : fffff800`035f0e80 fffffa80`10306b50 fffff800`035fecc0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`044dec40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxStartSystemThread+0x16

STACK_COMMAND:  .bugcheck ; kb

fffff880`100237a0 48ff25f94eedff  jmp     qword ptr [nvlddmkm+0x87a6a0 (fffff880`0fef86a0)]

SYMBOL_NAME:  nvlddmkm+9a57a0

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nvlddmkm

IMAGE_NAME:  nvlddmkm.sys


FAILURE_BUCKET_ID:  X64_0x116_IMAGE_nvlddmkm.sys

BUCKET_ID:  X64_0x116_IMAGE_nvlddmkm.sys


FAILURE_ID_HASH_STRING:  km:x64_0x116_image_nvlddmkm.sys

FAILURE_ID_HASH:  {1f9e0448-3238-5868-3678-c8e526bb1edc}

Followup: MachineOwner

7: kd> lmvm nvlddmkm
start             end                 module name
fffff880`0f67e000 fffff880`1030c000   nvlddmkm T (no symbols)           
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp:        Wed Jul 02 23:12:02 2014 (53B4446A)
    CheckSum:         00C4C7C9
    ImageSize:        00C8E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
20 Oct 2014   #16

Windows 7 Ultimate x64

No overclocking. Have a 750w Cooler Master PSU.

Computers not hot at all. Cool if anything.

Speccy Analysis:

I'm not sure if this issue is related at all, but I'm also unable to install two specific Windows Updates:
Security Update for Windows 7 for x64-based Systems (KB2984976)
Security Update for Windows 7 for x64-based Systems (KB2984972)

Error code: 800B0100
My System SpecsSystem Spec
20 Oct 2014   #17

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10

Owen Arc has asked so my stab in the dark mate I would like to see the rail voltage on the PSU so do this.

UsingHW Info PSU

Download HW Info and pick the right bit version -
HWiNFO, HWiNFO32/64 -Download -(copyand paste this site into the search bar) If you donot need the runninginformation in the smaller right hand panel close it. Inthe left hand windowclick on the + for the individual device groupings and theywill open out tothe various components.

Go on opening out further until you get to the device itself. click on it anditwill highlight. In the right hand window there will be a verydetaileddescription of that device as in brand, speeds model number etc etcThese arevery detailed and are just what is needed for searching for driversetc.

To getthe PSU volts you need to select the Sensor button circled in yellow inthe picfor PSU testing do the same and scroll down the readout as in my pic towhereit has Nuvoton = yours might be a different section name / title. Postback apic of that please.

If you want a more definitive test see this
butleaseonly use a digital multimeter and not an analogue as they injecttypically 9vinto a circuit to test and into a 3.3v or 5v rail - not a good idea!!see thepartial pic of the correct sort of meter in that tutorial. details ifyou scrolldown that listing.

Now a good reference article is this
Voltage Rails - Power Supply 101: AReference Of Specifications it will explain in detail what thevoltages are and functions of the PSU/

In my pic is what you will see for your Asus because this is my Asus Ivy Bridge readout - Nuovoton
My System SpecsSystem Spec
20 Oct 2014   #18

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Thanks John!
My System SpecsSystem Spec
20 Oct 2014   #19

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint

Owen27, do you have a GPU temp monitoring program that will allow a custom fan profile? As best as I can tell, your temps were 89C during Furmark. That is too high, for me. Set a pretty aggressive fan profile to stop it from getting the temps so high.

Also try reinstalling your current driver using this guide. Install the Display Driver and PhysX only.
NVIDIA Drivers - Avoid Problems

Then run Furmark again and wait until the temp levels out and take a screenshot then stop the test. When you run Furmark, your temps will rise very quickly, but will level out at a certain point and will stop rising.. that is where you need to take the screenshot and then stop the test. Also, look for any Artifacts during the test.
My System SpecsSystem Spec
20 Oct 2014   #20

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Thank you Steve!
My System SpecsSystem Spec

 BSOD Apparantly random

Thread Tools

Similar help and support threads
Thread Forum
Random BSOD after start and Random stuck on windows logo screen
Heyy.. So yesterday due to a sudden power outage (happens allot here), my windows started behaving erratically. First when the power came on my windows 7 ultimate 64 bit, was stuck on windows logo. i waited for about 20 mins and it was still stuck. The HDD read activity light on my casing was...
BSOD Help and Support
Random BSOD problems in the past 2 days. Random errors at random times
Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty...
BSOD Help and Support
BSOD at seemingly random times, memory dump blaming random drivers
I've been plagued by odd problems since making this custom build about a month ago, but the latest is the increasing frequency of BSODs. They never occur at load (gaming with high end specs), but often occur at shutdown (forcing a restart before I can then actually shut down). I normally boot into...
BSOD Help and Support
Random BSOD at random moments on Toshiba L500 laptop; graphics card?
My GF has had a Toshiba L500 laptop for 4 years now. It's a great model and it worked well...till now. It started about two weeks ago, with 1 blue screen every 1-2 days. I haven't reinstalled her windows for about a year, so i figured that was the problem. Four days ago it started blue...
BSOD Help and Support
Random BSOD with random error code at random moment
Hello Ok now i'm out of solution so i come here hoping that someone could help me I always had bsod hapening randomly but not like the this week I got 2 bsod/day when i'm playing, when i'm staring at my monitor or even when i'm sleeping with random error code like 0x1e, 0x24, 0x3b, 0x4a or 0xa...
BSOD Help and Support
BSOD doing random things (Google Chrome, minecraft, random times)
I have finally had it up to here with the BSODs, so I really need help. I ran a windows memtest and it detected no errors. I just finished updating to SP1 with pretty much most updates too. The BSODs I get the most are: Driver IRQL not less or Equal System Service Exception and these two I...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:43.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App