Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD error using a Xbox controller

28 Oct 2014   #1

W7 x64 Premium Family
BSOD error using a Xbox controller

Hi everyone, I've recently gotten BSODs when playing Steam games using my controller, (that sometimes disconnects/reconnects itself very quiclky while i'm playing) so i've wondered if you could help ^^"
My debug file should come up with this thread if i did not mess it up, thanks in advance!

My System SpecsSystem Spec
29 Oct 2014   #2

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Hi Hurlu.

Uninstall the XBox 360 wireless controller. Download a fresh copy from Software Downloads: Xbox 360 Wireless Controller for Windows and install it.

Let us know the situation after doing it.
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 10D, {5, 0, 1024, fffffa8005c09010}

*** WARNING: Unable to verify timestamp for xusb21.sys
*** ERROR: Module load completed but symbols could not be loaded for xusb21.sys
Probably caused by : xusb21.sys ( xusb21+2888 )

Followup: MachineOwner

2: kd> !analyze -v
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

The Kernel-Mode Driver Framework was notified that Windows detected an error
in a framework-based driver. In general, the dump file will yield additional
information about the driver that caused this bug check.
Arg1: 0000000000000005, A framework object handle of the incorrect type was passed to
    a framework object method.
Arg2: 0000000000000000, The handle value passed in.
Arg3: 0000000000001024, Reserved.
Arg4: fffffa8005c09010, Reserved.

Debugging Details:






ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre

LAST_CONTROL_TRANSFER:  from fffff88000e2a903 to fffff80002c91bc0

fffff880`037c3748 fffff880`00e2a903 : 00000000`0000010d 00000000`00000005 00000000`00000000 00000000`00001024 : nt!KeBugCheckEx
fffff880`037c3750 fffff880`00cc3888 : fffff880`00cc34cc 00000000`00000000 fffffa80`074d3480 fffffa80`074d3420 : Wdf01000!imp_WdfSpinLockAcquire+0x47
fffff880`037c37a0 fffff880`00cc34cc : 00000000`00000000 fffffa80`074d3480 fffffa80`074d3420 fffffa80`074d3420 : xusb21+0x2888
fffff880`037c37a8 00000000`00000000 : fffffa80`074d3480 fffffa80`074d3420 fffffa80`074d3420 fffffa80`074d3480 : xusb21+0x24cc


fffff880`00cc3888 ??              ???


SYMBOL_NAME:  xusb21+2888

FOLLOWUP_NAME:  MachineOwner


IMAGE_NAME:  xusb21.sys


FAILURE_BUCKET_ID:  X64_0x10D_5_xusb21+2888

BUCKET_ID:  X64_0x10D_5_xusb21+2888


FAILURE_ID_HASH_STRING:  km:x64_0x10d_5_xusb21+2888

FAILURE_ID_HASH:  {a6108764-9902-1ba7-ad7e-1007cd9377cc}

Followup: MachineOwner

2: kd> lmvm xusb21
start             end                 module name
fffff880`00cc1000 fffff880`00cd3100   xusb21   T (no symbols)           
    Loaded symbol image file: xusb21.sys
    Image path: \SystemRoot\system32\DRIVERS\xusb21.sys
    Image name: xusb21.sys
    Timestamp:        Fri Aug 14 03:40:17 2009 (4A848F49)
    CheckSum:         0001398B
    ImageSize:        00012100
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
29 Oct 2014   #3

W7 x64 Premium Family

Works as intended now, thanks a lot for the help
My System SpecsSystem Spec

30 Oct 2014   #4

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit

Good news.

Let us know for any further BSOD.
My System SpecsSystem Spec

 BSOD error using a Xbox controller

Thread Tools

Similar help and support threads
Thread Forum
BSOD driver framework error, while using wired xbox 360 controller
Hey guys apologies if I'm supposed to make this on another users thread with the same issue, I just wasn't exactly sure if I make my own thread or not.. But the issue is, when playing selected steam games (most recently Borderlands 2) with a wired xbox 360 controller, I eventually get a BSOD...
BSOD Help and Support
Xbox 360 controller status application wont start, error: 0xc000007b
The controller status application that installed with the Xbox 360 controller driver won't start. "The application was unable to start correctly (0xc000007b)." I don't really need the application to work, my controller is wired and I only have one so it is a useless program for me. My concern is...
Did my Xbox 360 PC Controller cause this bsod?
Hey guys, im no expert in viewing dump files so if anyone can analyse this dump file I have from when I got the bsod and tell me what caused it, i will be very grateful :) 112511-16317-01.rar It happened as I loaded Crysis 2, I inserted my pc xbox controller and a few seconds later I got a...
BSOD Help and Support
xbox controller BSOD
Hi i'm a new member and i tried yesterday to install the xbox controller's drivers on windows 7 x64 but when i connected it, it installs his windows drivers and it shows me a blue screen and the error is wdf0100.sys.Can you help me?
BSOD Help and Support
Xbox 360 controller wired BSOD
Hello everyone, I just bought a xbox 360 controller wired via amazon. After plugging it in there instantly appeared a blue screen: Problemereignisname: BlueScreen Betriebsystemversion: 6.1.7601. Gebietsschema-ID: 1031 Zusatzinformationen zum Problem: BCCode: ...
BSOD Help and Support
my xbox 360 controller for windows has error code 43
my controller was working fine until 1 day when i plugged it in the windows didnt recognise it and a message appeared saying usb device not recognised and the error was code 43.i have lost 2 of my joysticks just like this.pleasss can anybody help????:(:(:(:(:(:(
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:43.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App