Computer cannot load operating system-Error code 0X0000007B


  1. mad maximus
    Posts : 13
    windows 7 professional 64 bit
       New #1

    Computer cannot load operating system-Error code 0X0000007B


    Well, looks like I really messed the computer up this time. Computer was crashing, so I ran a couple of scan disks, and from what I remember, I got a pop up window on a reboot that asked for a yes or no answer. Forgetting the number one rule of debugging, to never answer yes to anything, I answered yes and now the computer will not boot. All the problem seems to be at the CMOS/BIOS screen. Anything after that doesn't work. Tried start up repair-no luck, safe mode doesn't work, command prompts to repair the boot record didn't work. Reloaded a back up copy and that didn't work either.

    I'm wondering if I blew away my boot program. Is there anything in the CMOS/BIOS setup utility that would get me back to a proper boot cycle? As I stated previously, any corrections tried down stream of the CMOS/BIOS have not worked.

    Computer Info as follows:

    Dual boot (XP Pro & Win 7 Pro) MaxForce PC
    Thermaltake 500W power supply
    Intel Core i7 870, 2.93 GHz, 8 MB
    Gigabyte GA-H57M-USB3 motherboard
    Super Talent DDR3-1333, 8 GB (2 x 4G) memory
    Hard Drive #1: Western Digital Caviar Black WD6401AALS, 640 GB, SATA 2, 32 MB (XP Pro)
    Hard Drive #2: Western Digital VelociRaptor WD3000HLFS, 300 GB (Win 7 Pro)

    Thanks for your time & any help will be greatly appreciated,
    Mad Maximus
      My Computer
    Quote Quote

  3. mad maximus
    Posts : 13
    windows 7 professional 64 bit
    Thread Starter
       New #2

    Forgot to add, neither operating system will boot, both get the same BSOD message.
      My Computer
    Quote Quote

 

  Related Discussions
To start my laptop started out making weird glitchy noises whenever i was doing something on it and it started to get a little hot. Then I would leave for a min and get a system memory dump / bluescreen. Then after wards it wouldn't load windows and just bluescreen after windows logo and restart....
Stop error code 0x0000007B
in BSOD Help and Support

BSOD occurred after I changed system startup to normal. The system startup was on diagnostic before it had Been changed to normal. I need help changing system startup back to diagnostic without doing it in safe mode or having windows load in any way. I am looking for a command prompt code to change...
I have a new Toshiba laptop with Windows 7. I have attemepted to install XP on it as dual boot, and also tried by wiping the hard drive and just going with XP. Both ways XP starts loading the files, but then stops and says: "A problem has been detected and windows has been shut down to...
Hello, I am new here. I try installing windows 7 ultimate to my notebook Panasonic Cf-52. I initialised the bitlocker to my Drive C and also encrypted it, then I restarted the computer. At boot up, bitlocker requested to enter 48digits to confirm. I pressed esc to exit that screen and windows 7...
I am trying to use the windows 7 upgrade from XP when I do I get a reboot to starting windows (For about 20 minutes ) then I get a blue screen. with error code 0x0000007B: I have unpluged all my usb to no avail. I have also tried to run the upgrade disc from safe mode. Each time I still get...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 09:01.
Find Us