BSOD using FreemakeVideoConverter Page_Fault_ other frequent BSOD

I didn't find anything about nvstreamkms on that page, but it does come from Nvidia. I believe it is part of GEforce experience. It is used to stream to the Nvidia Shield, I believe. I don't use it, but I know others do and have no trouble. I think it causes a few people problems but not others. Most of the problems with it happen in Windows 8.1.

The response at Toms was basically the same as the point of the NVidia tutorial. Do a custom install and just install the PhysX and display driver. The GEforce experience was just added because most people like it. I don't install it. NVIDIA Drivers - Avoid Problems

Have you considered doing a clean startup? (Troubleshoot Application Conflicts by Performing a Clean Startup) it basically loads windows only, which should not cause a BSOD without hardware problems or corrupted files. Once you determine you are BSOD free, start up 1 program at a time and test it, if all goes well start another until you find the one causing you problems.

Either that or a clean install with just Windows installed and tested, then install 1 program at a time until you find the one causing the problems.

Code:

Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c000001d, fffff800029a100f, fffff88009857f80, 0}
Probably caused by : memory_corruption
Followup: memory_corruption

How many times have you run memtest?

Later on I found this which may be a victim of the memory or it's possibly the Graphics card memory.

Code:

fffff880`098575b8  fffff880`038b285eUnable to load image nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
 nvlddmkm+0x21785e

If you haven't done it before I would like you to download ad install CPU-Z CPUID - System & hardware benchmark, monitoring, reporting Please post screenshots (Screenshots and Files - Upload and Post in Seven Forums) of the memory tab and the SPD tab. You can select each dimm slot on the SPD tab. I would like every one with ram in it. It is not necessary to post the empty one. Do it even if you have done it before please.

I would also like you to run Heaven Benchmark | Unigine: real-time 3D engine (game, simulation, visualization and VR) Ungine Heaven. When it first opens up, you can set the configuration you want. In the second slot select Extreme from the dropdown and nothing else, then push run. Another screen will open, as soon as it starts moving push benchmark in the top left. When done, please post a screenshot of the score. The first screen where you set the configuration should look like this. Please keep track of your GPU temps and stop the test if they get too hot

Attachment 346329

OK, maybe I shouldn't have had you run the extreme. Do you have a GPU Monitoring tool? which one? On most of them it will allow you to set a fan profile You can set an aggressive fan profile which will make your card run cooler. Do you game any? What are your temps when you do whatever is the most stressful thing you do with the graphics card?