Seemingly random BSODs, different reasons multiple occurences per day

Hello tizbad2k, I will try to help you with this problem. For Some reason the files you uploaded did not all come through. Please re run the BSOD posting instructions (Blue Screen of Death (BSOD) Posting Instructions) and use #2 this time and click the 'Grab All' button and give it long enough to do it's collection. Sometimes it can take a few minutes.

You are correct that all the dumps are a different Stop code. One thing I noticed was in all the dumps, there were references to the file system and I/O procedures. That leads me to believe there may be problems with your hard drives. Please run check disk Disk Check on your mechanical drives and make sure your OCZ SSD's firmware is up to date.

Also please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Several reasons were given in your dump files. I only had time to look at the last 5 or 6 right now,

Code:

Use !analyze -v to get detailed debugging information.
BugCheck 19, {3, fffff8a01b1ef010, fffff8a01b1ef010, fffff8a01047fbe0}
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+cbb )
Followup: Pool_corruption

Code:

Use !analyze -v to get detailed debugging information.
BugCheck 19, {20, fffff8a00e8831a0, fffff8a00e883360, 51c0202}
GetPointerFromAddress: unable to read from fffff800030c7100
GetUlongFromAddress: unable to read from fffff800030c71c0
Probably caused by : fltmgr.sys ( fltmgr!DoFreeContextMemory+6b )

Code:

Use !analyze -v to get detailed debugging information.
BugCheck 50, {fffff8a014967b60, 1, fffff880012ae9ab, 0}
Could not read faulting driver name
Probably caused by : Ntfs.sys ( Ntfs!NtfsFullDeleteLcb+bb )
Followup: MachineOwner

These last 2 relate directly to your hard drive or the file system, and the first one can. However, the one that is concerning me most is the next one. It can cause any type of error at any time, and you having a different error each time is indicative of this error. Until we rule out the next error, none of the information in the dump files id reliable.

Code:

Use !analyze -v to get detailed debugging information.
BugCheck 4E, {2, 2e24e, 127fff, 1}
Probably caused by : memory_corruption ( nt!MiUnlinkPageFromLockedList+8d )
Followup: MachineOwner

In order to rule this out you will need to test it, and it will take a lot of time.

Please Run Memtest86+

   Information

Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for a minimum of 8 complete passes all at the same time or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask

You need to set it to Small Memory Dump, not Kernel Dump.

You seem to be getting a lot of errors from ehRecvr.exe, which is the module for watching TV in Media center. Do you have that set up to watch TV and a tuner card?

You also seem to have more programs than necessary running at startup. You can type msconfig in a run box (hold down the hey with the Windows flag and press R ) go to the startup tab and deselect everything you do not want running at startup. It will use less resources and give you a quicker startup. The programs you de select will still work just fine, they just won't run at startup but will run when you need them to. I have only Windows Sidebar and my Antivirus run at startup, nothing else.

The last date of errors in your msinfo file was 12/11. on that date there were about 30-35 errors listing ehRecvr.exe. I understand wanting to watch TV on the computer and have done so myself. But, the error codes say there is a problem with hardware, software or maybe the way it is set up. It could even be bad codex, possibly.